暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with silver PCIe bracket, one USB-C and two USB-A ports, SATA power connector

EN-Labs

EN-Labs PCIEU3A2CS USB 3.1 Gen 1 Type-C + 2 Type-A PCIe expansion card, SATA power

SKU CH-8TPB-Z9JYJ

Adds one USB-C and two USB-A ports at 5 Gbit/s through a PCIe slot using a VIA VL805 chipset with SATA power

  • FeaturesFeatures: Add 3 USB 3.0 ports(1 x USB Type-C+2 x Type A + 20
  • Add three USB 3.1 Gen 1 ports via a single PCI Express x1 slot
  • USB Type-C and two Type-A connectors reach 5 Gbit/s transfer rates
  • VIA VL805 chipset handles SuperSpeed USB 3.1 Gen 1 and legacy USB 2.0/1.1
  • SATA 15-pin power connector supplies stable current for connected devices
  • Full-profile bracket fits standard desktop cases and supports x1, x4, x8, x16 slots

PCIe USB 3.1 Gen 1 expansion card

The EN-Labs PCIEU3A2CS adds one USB Type-C and two USB Type-A ports to a desktop through a PCI Express x1 slot. It uses the VIA VL805 chipset and supports the USB 3.1 Gen 1 standard at up to 5Gbps. The card is backward compatible with USB 2.0 and USB 1.1 devices.

Build integration: slot and power

The card fits PCIe x1, x4, x8 or x16 slots and includes a full-profile bracket for standard cases. It draws auxiliary power from a SATA 15-pin connector, so a free SATA power lead from the PSU is required. A 20-pin internal header is also present on the board.

Thermals, noise and power draw

The controller runs without a dedicated fan, relying on case airflow for passive cooling. Power consumption is limited to what the SATA connector supplies, adding minimal load to the PSU. Silent operation is maintained because there are no moving parts on the card.

特長

  • Add three USB 3.1 Gen 1 ports via a single PCI Express x1 slot
  • USB Type-C and two Type-A connectors reach 5 Gbit/s transfer rates
  • VIA VL805 chipset handles SuperSpeed USB 3.1 Gen 1 and legacy USB 2.0/1.1
  • SATA 15-pin power connector supplies stable current for connected devices
  • Full-profile bracket fits standard desktop cases and supports x1, x4, x8, x16 slots

仕様

BrandEn-Labs
ModelPCIEU3A2CS
FeaturesFeatures: Add 3 USB 3.0 ports(1 x USB Type-C+2 x Type A + 20 Pin Interna) through a PCI Express slot Compatible with PCI-Express 2.0 stardard Compatible with Super Speed USB 3.1 GEN 1(5Gbps) stardard,backwards to USB 2.0 and USB 1.1 Chip set :VIA VL805 Maximum transfer speed : 5Gbps Power by SATA 15pin Supports PCIe 1x, 4x, 8x, 16x Slot Support Windows XP / 2003 / Win7 / Win8 / Vista / Linux Interface: Bus Type:PCI Express Type Standard:Profile (LP bracket incl.) Chipset:VIA VL805 Interface: USB 3.1 GEN 1 Port Type and Rate :USB 3.0 - 5 Gbit/s Connector Type(s): 1 - PCI Express x1 Ma

この商品に関する質問

Does the VIA VL805 chipset cap sustained transfers at the 5 Gbit/s Gen 1 ceiling?

Yes, the VL805 controller is rated for USB 3.1 Gen 1 at 5 Gbit/s, so sustained throughput cannot exceed that limit.

Will the card draw enough power through the SATA 15-pin connector to keep all three ports running cool under all-day load?

The SATA 15-pin feed supplies the extra current the VL805 needs, keeping port power stable and heat low during continuous use.

Must the motherboard have a free PCI Express x1 slot and a spare SATA power lead for this card to work?

Yes, it installs in any PCIe x1, x4, x8 or x16 slot and requires one SATA 15-pin power connector from the PSU.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。