저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green circuit board with silver PCIe bracket, one USB-C and two USB-A ports, SATA power connector

EN-Labs

EN-Labs PCIEU3A2CS USB 3.1 Gen 1 Type-C + 2 Type-A PCIe expansion card, SATA power

SKU CH-8TPB-Z9JYJ

Adds one USB-C and two USB-A ports at 5 Gbit/s through a PCIe slot using a VIA VL805 chipset with SATA power

  • FeaturesFeatures: Add 3 USB 3.0 ports(1 x USB Type-C+2 x Type A + 20
  • Add three USB 3.1 Gen 1 ports via a single PCI Express x1 slot
  • USB Type-C and two Type-A connectors reach 5 Gbit/s transfer rates
  • VIA VL805 chipset handles SuperSpeed USB 3.1 Gen 1 and legacy USB 2.0/1.1
  • SATA 15-pin power connector supplies stable current for connected devices
  • Full-profile bracket fits standard desktop cases and supports x1, x4, x8, x16 slots

PCIe USB 3.1 Gen 1 expansion card

The EN-Labs PCIEU3A2CS adds one USB Type-C and two USB Type-A ports to a desktop through a PCI Express x1 slot. It uses the VIA VL805 chipset and supports the USB 3.1 Gen 1 standard at up to 5Gbps. The card is backward compatible with USB 2.0 and USB 1.1 devices.

Build integration: slot and power

The card fits PCIe x1, x4, x8 or x16 slots and includes a full-profile bracket for standard cases. It draws auxiliary power from a SATA 15-pin connector, so a free SATA power lead from the PSU is required. A 20-pin internal header is also present on the board.

Thermals, noise and power draw

The controller runs without a dedicated fan, relying on case airflow for passive cooling. Power consumption is limited to what the SATA connector supplies, adding minimal load to the PSU. Silent operation is maintained because there are no moving parts on the card.

주요 특징

  • Add three USB 3.1 Gen 1 ports via a single PCI Express x1 slot
  • USB Type-C and two Type-A connectors reach 5 Gbit/s transfer rates
  • VIA VL805 chipset handles SuperSpeed USB 3.1 Gen 1 and legacy USB 2.0/1.1
  • SATA 15-pin power connector supplies stable current for connected devices
  • Full-profile bracket fits standard desktop cases and supports x1, x4, x8, x16 slots

사양

BrandEn-Labs
ModelPCIEU3A2CS
FeaturesFeatures: Add 3 USB 3.0 ports(1 x USB Type-C+2 x Type A + 20 Pin Interna) through a PCI Express slot Compatible with PCI-Express 2.0 stardard Compatible with Super Speed USB 3.1 GEN 1(5Gbps) stardard,backwards to USB 2.0 and USB 1.1 Chip set :VIA VL805 Maximum transfer speed : 5Gbps Power by SATA 15pin Supports PCIe 1x, 4x, 8x, 16x Slot Support Windows XP / 2003 / Win7 / Win8 / Vista / Linux Interface: Bus Type:PCI Express Type Standard:Profile (LP bracket incl.) Chipset:VIA VL805 Interface: USB 3.1 GEN 1 Port Type and Rate :USB 3.0 - 5 Gbit/s Connector Type(s): 1 - PCI Express x1 Ma

이 상품에 대한 질문

Does the VIA VL805 chipset cap sustained transfers at the 5 Gbit/s Gen 1 ceiling?

Yes, the VL805 controller is rated for USB 3.1 Gen 1 at 5 Gbit/s, so sustained throughput cannot exceed that limit.

Will the card draw enough power through the SATA 15-pin connector to keep all three ports running cool under all-day load?

The SATA 15-pin feed supplies the extra current the VL805 needs, keeping port power stable and heat low during continuous use.

Must the motherboard have a free PCI Express x1 slot and a spare SATA power lead for this card to work?

Yes, it installs in any PCIe x1, x4, x8 or x16 slot and requires one SATA 15-pin power connector from the PSU.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.