eSUN
eSUN Lithophane Cyan PLA+ Filament 1.75mm 1KG 3d printers accessory
Cyan PLA+ filament with ±0.03 mm tolerance for colour-mixing lithophanes on high-speed FDM printers
- ColorCyan
- TypePLA+
Color Cyan
- Cyan
- Yellow
- White
Üzeri çizili sürümler mevcuttur ancak burada stokta değildir.
- Designed for colour lithophane prints using CMYK cyan PLA+
- High-speed printing up to 400 mm/s on popular FDM printers
- Tangle-free spool with precise 1.75 mm diameter and ±0.03 mm tolerance
- Low warping and minimal stringing for consistent, high-success prints
- Strong layer adhesion produces tough, vivid functional parts
Cyan PLA+ filament for colour lithophanes
This eSUN PLA+ spool comes in CMYK cyan and is formulated for lithophane printing. The material uses the cyan, magenta, yellow and white mixing principle to produce full-colour images when layers are backlit. It is supplied as a single 1 kg reel of 1.75 mm filament with a dimensional tolerance of ±0.03 mm.
Suited to makers creating backlit colour prints
The filament targets hobbyists and designers who want to produce photographic lithophanes in full colour rather than monochrome. It works with popular high-speed FDM printers including Bambu Lab X1 series, Creality K1 series, Prusa and UltiMaker machines. Users who only need standard structural parts or single-colour models should consider ordinary PLA or PETG instead.
Check printer compatibility and slicer settings
Verify that your FDM printer accepts 1.75 mm filament and can reach the nozzle temperatures recommended for PLA+. Confirm the spool dimensions fit your printer's holder or an external feed system. Adjust retraction and cooling profiles in your slicer to match the material's low-warping, high-speed characteristics for best layer adhesion.
Öne çıkanlar
- Designed for colour lithophane prints using CMYK cyan PLA+
- High-speed printing up to 400 mm/s on popular FDM printers
- Tangle-free spool with precise 1.75 mm diameter and ±0.03 mm tolerance
- Low warping and minimal stringing for consistent, high-success prints
- Strong layer adhesion produces tough, vivid functional parts
Teknik özellikler
| Brand | eSUN |
|---|---|
| Model | 3D Printing Filament |
| Color | Cyan |
| Type | PLA+ |
Bu modelin diğer sürümleri
Aynı seriden 2 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
eSUN
eSUN Lithophane Cyan PLA+ Filament 1.75mm 1KG 3D Printers Accessories
- Cyan
- PLA+
$19,99
0.00025764BTC
StoktaBu ürünle ilgili sorular
What printer nozzle diameter works with the 1.75mm filament?
Any standard 0.4mm or similar FDM nozzle accepting 1.75mm PLA+ will feed the cyan spool without hardware changes.
Will the +/- 0.03mm tolerance cause issues on my older Ender 3?
The tight tolerance and good winding prevent tangles and clogs, so the filament runs reliably on legacy machines such as the Ender 3.
How can I verify the cyan layer bonds correctly in a multi-colour lithophane?
Print a small CMYK test tile; even layer lines, no stringing, and accurate colour mixing confirm the PLA+ is performing as specified.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
