Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Cyan PLA+ filament on a 1KG spool

eSUN

eSUN Lithophane Cyan PLA+ Filament 1.75mm 1KG 3d printers accessory

SKU CH-V7BY-D9JJX

Cyan PLA+ filament with ±0.03 mm tolerance for colour-mixing lithophanes on high-speed FDM printers

  • ColorCyan
  • TypePLA+

Color Cyan

  • Cyan
  • Yellow
  • White

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • Designed for colour lithophane prints using CMYK cyan PLA+
  • High-speed printing up to 400 mm/s on popular FDM printers
  • Tangle-free spool with precise 1.75 mm diameter and ±0.03 mm tolerance
  • Low warping and minimal stringing for consistent, high-success prints
  • Strong layer adhesion produces tough, vivid functional parts

Cyan PLA+ filament for colour lithophanes

This eSUN PLA+ spool comes in CMYK cyan and is formulated for lithophane printing. The material uses the cyan, magenta, yellow and white mixing principle to produce full-colour images when layers are backlit. It is supplied as a single 1 kg reel of 1.75 mm filament with a dimensional tolerance of ±0.03 mm.

Suited to makers creating backlit colour prints

The filament targets hobbyists and designers who want to produce photographic lithophanes in full colour rather than monochrome. It works with popular high-speed FDM printers including Bambu Lab X1 series, Creality K1 series, Prusa and UltiMaker machines. Users who only need standard structural parts or single-colour models should consider ordinary PLA or PETG instead.

Check printer compatibility and slicer settings

Verify that your FDM printer accepts 1.75 mm filament and can reach the nozzle temperatures recommended for PLA+. Confirm the spool dimensions fit your printer's holder or an external feed system. Adjust retraction and cooling profiles in your slicer to match the material's low-warping, high-speed characteristics for best layer adhesion.

Pluspunten

  • Designed for colour lithophane prints using CMYK cyan PLA+
  • High-speed printing up to 400 mm/s on popular FDM printers
  • Tangle-free spool with precise 1.75 mm diameter and ±0.03 mm tolerance
  • Low warping and minimal stringing for consistent, high-success prints
  • Strong layer adhesion produces tough, vivid functional parts

Specificaties

BrandeSUN
Model3D Printing Filament
ColorCyan
TypePLA+

Vragen over dit artikel

What printer nozzle diameter works with the 1.75mm filament?

Any standard 0.4mm or similar FDM nozzle accepting 1.75mm PLA+ will feed the cyan spool without hardware changes.

Will the +/- 0.03mm tolerance cause issues on my older Ender 3?

The tight tolerance and good winding prevent tangles and clogs, so the filament runs reliably on legacy machines such as the Ender 3.

How can I verify the cyan layer bonds correctly in a multi-colour lithophane?

Print a small CMYK test tile; even layer lines, no stringing, and accurate colour mixing confirm the PLA+ is performing as specified.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.