Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Cyan PLA+ filament on a 1KG spool

eSUN

eSUN Lithophane Cyan PLA+ Filament 1.75mm 1KG 3d printers accessory

SKU CH-V7BY-D9JJX

Cyan PLA+ filament with ±0.03 mm tolerance for colour-mixing lithophanes on high-speed FDM printers

  • ColorCyan
  • TypePLA+

Color Cyan

  • Designed for colour lithophane prints using CMYK cyan PLA+
  • High-speed printing up to 400 mm/s on popular FDM printers
  • Tangle-free spool with precise 1.75 mm diameter and ±0.03 mm tolerance
  • Low warping and minimal stringing for consistent, high-success prints
  • Strong layer adhesion produces tough, vivid functional parts

Cyan PLA+ filament for colour lithophanes

This eSUN PLA+ spool comes in CMYK cyan and is formulated for lithophane printing. The material uses the cyan, magenta, yellow and white mixing principle to produce full-colour images when layers are backlit. It is supplied as a single 1 kg reel of 1.75 mm filament with a dimensional tolerance of ±0.03 mm.

Suited to makers creating backlit colour prints

The filament targets hobbyists and designers who want to produce photographic lithophanes in full colour rather than monochrome. It works with popular high-speed FDM printers including Bambu Lab X1 series, Creality K1 series, Prusa and UltiMaker machines. Users who only need standard structural parts or single-colour models should consider ordinary PLA or PETG instead.

Check printer compatibility and slicer settings

Verify that your FDM printer accepts 1.75 mm filament and can reach the nozzle temperatures recommended for PLA+. Confirm the spool dimensions fit your printer's holder or an external feed system. Adjust retraction and cooling profiles in your slicer to match the material's low-warping, high-speed characteristics for best layer adhesion.

Ciri-ciri utama

  • Designed for colour lithophane prints using CMYK cyan PLA+
  • High-speed printing up to 400 mm/s on popular FDM printers
  • Tangle-free spool with precise 1.75 mm diameter and ±0.03 mm tolerance
  • Low warping and minimal stringing for consistent, high-success prints
  • Strong layer adhesion produces tough, vivid functional parts

Spesifikasi

BrandeSUN
Model3D Printing Filament
ColorCyan
TypePLA+

Versi lain model ini

2 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

What printer nozzle diameter works with the 1.75mm filament?

Any standard 0.4mm or similar FDM nozzle accepting 1.75mm PLA+ will feed the cyan spool without hardware changes.

Will the +/- 0.03mm tolerance cause issues on my older Ender 3?

The tight tolerance and good winding prevent tangles and clogs, so the filament runs reliably on legacy machines such as the Ender 3.

How can I verify the cyan layer bonds correctly in a multi-colour lithophane?

Print a small CMYK test tile; even layer lines, no stringing, and accurate colour mixing confirm the PLA+ is performing as specified.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.