暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Cyan PLA+ filament on a 1KG spool

eSUN

eSUN Lithophane Cyan PLA+ Filament 1.75mm 1KG 3d printers accessory

SKU CH-V7BY-D9JJX

Cyan PLA+ filament with ±0.03 mm tolerance for colour-mixing lithophanes on high-speed FDM printers

  • ColorCyan
  • TypePLA+

Color Cyan

  • Designed for colour lithophane prints using CMYK cyan PLA+
  • High-speed printing up to 400 mm/s on popular FDM printers
  • Tangle-free spool with precise 1.75 mm diameter and ±0.03 mm tolerance
  • Low warping and minimal stringing for consistent, high-success prints
  • Strong layer adhesion produces tough, vivid functional parts

Cyan PLA+ filament for colour lithophanes

This eSUN PLA+ spool comes in CMYK cyan and is formulated for lithophane printing. The material uses the cyan, magenta, yellow and white mixing principle to produce full-colour images when layers are backlit. It is supplied as a single 1 kg reel of 1.75 mm filament with a dimensional tolerance of ±0.03 mm.

Suited to makers creating backlit colour prints

The filament targets hobbyists and designers who want to produce photographic lithophanes in full colour rather than monochrome. It works with popular high-speed FDM printers including Bambu Lab X1 series, Creality K1 series, Prusa and UltiMaker machines. Users who only need standard structural parts or single-colour models should consider ordinary PLA or PETG instead.

Check printer compatibility and slicer settings

Verify that your FDM printer accepts 1.75 mm filament and can reach the nozzle temperatures recommended for PLA+. Confirm the spool dimensions fit your printer's holder or an external feed system. Adjust retraction and cooling profiles in your slicer to match the material's low-warping, high-speed characteristics for best layer adhesion.

特長

  • Designed for colour lithophane prints using CMYK cyan PLA+
  • High-speed printing up to 400 mm/s on popular FDM printers
  • Tangle-free spool with precise 1.75 mm diameter and ±0.03 mm tolerance
  • Low warping and minimal stringing for consistent, high-success prints
  • Strong layer adhesion produces tough, vivid functional parts

仕様

BrandeSUN
Model3D Printing Filament
ColorCyan
TypePLA+

このモデルの他のバージョン

同シリーズにさらに 2点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What printer nozzle diameter works with the 1.75mm filament?

Any standard 0.4mm or similar FDM nozzle accepting 1.75mm PLA+ will feed the cyan spool without hardware changes.

Will the +/- 0.03mm tolerance cause issues on my older Ender 3?

The tight tolerance and good winding prevent tangles and clogs, so the filament runs reliably on legacy machines such as the Ender 3.

How can I verify the cyan layer bonds correctly in a multi-colour lithophane?

Print a small CMYK test tile; even layer lines, no stringing, and accurate colour mixing confirm the PLA+ is performing as specified.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。