Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
White sleeved PSU cable kit with ATX 24-pin, CPU 8-pin and PCI-E 8-pin connectors, 300 mm length, 18 AWG wire, combs included

FormulaMod

FormulaMod Fm-NCK1 liquid cooler cable kit 300mm 18 AWG white

SKU CH-62TZ-3HTMQ MPN Fm-NCK1

Supplies ATX 24-pin, CPU 8-pin and PCIe 8-pin power via 18 AWG white cables with pre-fitted combs at 300 mm length

  • TypeAccessories
  • Fan SizeNo Fans
  • ColorWhite

Color White

  • Red
  • Green
  • Blue
  • Black
  • White
  • Orange
  • Purple
  • Silver
  • Sky Blue
  • Pink
  • Gray

Üzeri çizili sürümler mevcuttur ancak burada stokta değildir.

  • Clean 300 mm cable runs keep liquid-cooling loops tidy
  • 18 AWG conductors deliver stable power to every component
  • Pre-fitted combs on each cable simplify installation
  • Male 5557 to female 5559 connectors match standard PSU headers
  • White finish coordinates with light-themed builds

Extension cable kit for liquid-cooled builds

The FormulaMod Fm-NCK1 kit supplies pre-assembled cables that connect a power supply to the motherboard and graphics card inside a liquid-cooled chassis. White 18 AWG conductors run 300 mm from male 5557 to female 5559 connectors, and each cable includes two matching combs for alignment. The set covers ATX 24-pin, PCI-E 8-pin and CPU 8-pin paths in a single package.

Thermals noise and power draw in normal use

Because the kit carries only electrical current, it adds no heat, noise or fan load to the cooling loop. The 18 AWG gauge is rated for the current delivered by standard desktop power supplies, so voltage drop across the 300 mm length remains negligible. No active components are present, leaving the thermal and acoustic profile entirely unchanged.

Build fit what it needs and what it frees

The fixed 300 mm length suits compact reservoirs and tight routing channels where stock cables would bunch or kink. Male-to-female 5557-to-5559 interfaces plug directly into existing PSU and component headers without adapters. Pre-fitted combs keep wires parallel, freeing space around water blocks and radiators for cleaner tubing runs.

Öne çıkanlar

  • Clean 300 mm cable runs keep liquid-cooling loops tidy
  • 18 AWG conductors deliver stable power to every component
  • Pre-fitted combs on each cable simplify installation
  • Male 5557 to female 5559 connectors match standard PSU headers
  • White finish coordinates with light-themed builds

Teknik özellikler

SeriesN/A
TypeAccessories
Fan SizeNo Fans
ColorWhite

Bu ürünle ilgili sorular

How do I plug the 5557 male end into my PSU and the 5559 female end into the component without forcing the pins?

Align the 5557 male connector with the PSU port and the 5559 female connector with the component header, then press straight in until the latch clicks; the 18 AWG cores are stiff, so do not rock the plug sideways or the pins can bend.

Will the white sleeving or the two included combs per cable yellow or loosen over time, and should I plan to replace them?

The sleeving is colour-fast under normal case temperatures and the combs snap tightly onto the 3 mm diameter cables; they do not require scheduled replacement unless you physically break a comb during a rebuild.

At what point does the 300 mm length become the limiting factor when routing behind a large motherboard tray?

The fixed 300 mm reach from PSU to component is the first constraint; if the grommet-to-header distance exceeds that, the cable will pull tight and you cannot extend it without ordering a custom length.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.