Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Two white compression fittings with G1/4 threads for 3/8 ID 1/2 OD soft tubing

greenDracaena

greenDracaena D-RGKN-B38-White-2 G1/4 to 3/8 ID 1/2 OD Compression Fitting 2 Pack White

SKU CH-PTP5-DJB0Y

Two white brass compression fittings connect 3/8 ID, 1/2 OD soft tubing to G1/4 threads with embedded O-ring seals

  • TypeWater
  • Block CompatibilityDesktop
  • Block Compatibility - AMDDesktop
  • Block Compatibility - IntelDesktop
  • Pump Noise0 decibels
  • Radiator Size2 pcs
  • White brass fittings resist corrosion for lasting loop reliability
  • G1/4 threads accept 3/8 ID 1/2 OD soft tubing for flexible routing
  • Embedded O-ring design creates leakproof seal under pressure
  • Two-pack supplies matching fittings for inlet and outlet runs
  • Zero-decibel passive components add no acoustic noise to the system

White compression fittings for soft tubing

This two-pack of G1/4 compression fittings connects 3/8" ID, 1/2" OD soft tubing to standard water-cooling components. The brass bodies with white chrome finish suit custom desktop loops where a clean, uniform colour scheme matters. Each fitting includes an embedded O-ring for a leakproof seal.

Builders matching white aesthetics

These suit anyone assembling a soft-tube loop with white accents and the specified hose size. They will not work for hard-tube runs, larger or smaller bore tubing, or threads other than G1/4. Buyers needing angled or rotary adapters should look at different fitting types.

Hand-tight installation with O-ring seal

Thread the fitting into a G1/4 port, slide the soft tube over the barb, and tighten the compression collar by hand. The captured O-ring seals the tube end without tools. The usual mistake is under-tightening the collar, which can allow seepage once the loop is pressurised.

Öne çıkanlar

  • White brass fittings resist corrosion for lasting loop reliability
  • G1/4 threads accept 3/8 ID 1/2 OD soft tubing for flexible routing
  • Embedded O-ring design creates leakproof seal under pressure
  • Two-pack supplies matching fittings for inlet and outlet runs
  • Zero-decibel passive components add no acoustic noise to the system

Teknik özellikler

BrandgreenDracaena
SeriesSoft Tube 1/2" OD (White)
ModelD-RGKN-B38-White-2
Part NumberD-RGKN-B38-White-2
TypeWater
Block CompatibilityDesktop
Block Compatibility - AMDDesktop
Block Compatibility - IntelDesktop
Pump Noise0 decibels
Radiator Size2 pcs
Fan Size2 pcs
Fan Dim.0.86 in x 0.7 in x 0.86 in
Fan Noise0 decibels
ColorWhite
LED ColorSoft Tube 1/2" OD (White)
Package ContentsO-rings

Bu ürünle ilgili sorular

What tubing dimensions do I need to connect these G1/4 fittings?

These fittings accept soft tubing with a 3/8 inch inner diameter and 1/2 inch outer diameter, matching the 10×13 mm specification.

Will these white fittings thread into the G1/4 ports on my existing radiator and water blocks?

Yes, the G1/4 thread is the standard size used on most desktop radiators, blocks and pumps, so they will screw directly into those ports.

How can I verify the compression seal is holding after I assemble the loop?

Pressure-test the loop with the system powered off; the embedded O-rings should show no drips or pressure loss over several minutes.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.