greenDracaena
greenDracaena D-RGKN-B38-White-2 G1/4 to 3/8 ID 1/2 OD Compression Fitting 2 Pack White
Two white brass compression fittings connect 3/8 ID, 1/2 OD soft tubing to G1/4 threads with embedded O-ring seals
- TypeWater
- Block CompatibilityDesktop
- Block Compatibility - AMDDesktop
- Block Compatibility - IntelDesktop
- Pump Noise0 decibels
- Radiator Size2 pcs
- White brass fittings resist corrosion for lasting loop reliability
- G1/4 threads accept 3/8 ID 1/2 OD soft tubing for flexible routing
- Embedded O-ring design creates leakproof seal under pressure
- Two-pack supplies matching fittings for inlet and outlet runs
- Zero-decibel passive components add no acoustic noise to the system
White compression fittings for soft tubing
This two-pack of G1/4 compression fittings connects 3/8" ID, 1/2" OD soft tubing to standard water-cooling components. The brass bodies with white chrome finish suit custom desktop loops where a clean, uniform colour scheme matters. Each fitting includes an embedded O-ring for a leakproof seal.
Builders matching white aesthetics
These suit anyone assembling a soft-tube loop with white accents and the specified hose size. They will not work for hard-tube runs, larger or smaller bore tubing, or threads other than G1/4. Buyers needing angled or rotary adapters should look at different fitting types.
Hand-tight installation with O-ring seal
Thread the fitting into a G1/4 port, slide the soft tube over the barb, and tighten the compression collar by hand. The captured O-ring seals the tube end without tools. The usual mistake is under-tightening the collar, which can allow seepage once the loop is pressurised.
Høydepunkter
- White brass fittings resist corrosion for lasting loop reliability
- G1/4 threads accept 3/8 ID 1/2 OD soft tubing for flexible routing
- Embedded O-ring design creates leakproof seal under pressure
- Two-pack supplies matching fittings for inlet and outlet runs
- Zero-decibel passive components add no acoustic noise to the system
Spesifikasjoner
| Brand | greenDracaena |
|---|---|
| Series | Soft Tube 1/2" OD (White) |
| Model | D-RGKN-B38-White-2 |
| Part Number | D-RGKN-B38-White-2 |
| Type | Water |
| Block Compatibility | Desktop |
| Block Compatibility - AMD | Desktop |
| Block Compatibility - Intel | Desktop |
| Pump Noise | 0 decibels |
| Radiator Size | 2 pcs |
| Fan Size | 2 pcs |
| Fan Dim. | 0.86 in x 0.7 in x 0.86 in |
| Fan Noise | 0 decibels |
| Color | White |
| LED Color | Soft Tube 1/2" OD (White) |
| Package Contents | O-rings |
Spørsmål om denne varen
What tubing dimensions do I need to connect these G1/4 fittings?
These fittings accept soft tubing with a 3/8 inch inner diameter and 1/2 inch outer diameter, matching the 10×13 mm specification.
Will these white fittings thread into the G1/4 ports on my existing radiator and water blocks?
Yes, the G1/4 thread is the standard size used on most desktop radiators, blocks and pumps, so they will screw directly into those ports.
How can I verify the compression seal is holding after I assemble the loop?
Pressure-test the loop with the system powered off; the embedded O-rings should show no drips or pressure loss over several minutes.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



