Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two white compression fittings with G1/4 threads for 3/8 ID 1/2 OD soft tubing

greenDracaena

greenDracaena D-RGKN-B38-White-2 G1/4 to 3/8 ID 1/2 OD Compression Fitting 2 Pack White

SKU CH-PTP5-DJB0Y

Two white brass compression fittings connect 3/8 ID, 1/2 OD soft tubing to G1/4 threads with embedded O-ring seals

  • TypeWater
  • Block CompatibilityDesktop
  • Block Compatibility - AMDDesktop
  • Block Compatibility - IntelDesktop
  • Pump Noise0 decibels
  • Radiator Size2 pcs
  • White brass fittings resist corrosion for lasting loop reliability
  • G1/4 threads accept 3/8 ID 1/2 OD soft tubing for flexible routing
  • Embedded O-ring design creates leakproof seal under pressure
  • Two-pack supplies matching fittings for inlet and outlet runs
  • Zero-decibel passive components add no acoustic noise to the system

White compression fittings for soft tubing

This two-pack of G1/4 compression fittings connects 3/8" ID, 1/2" OD soft tubing to standard water-cooling components. The brass bodies with white chrome finish suit custom desktop loops where a clean, uniform colour scheme matters. Each fitting includes an embedded O-ring for a leakproof seal.

Builders matching white aesthetics

These suit anyone assembling a soft-tube loop with white accents and the specified hose size. They will not work for hard-tube runs, larger or smaller bore tubing, or threads other than G1/4. Buyers needing angled or rotary adapters should look at different fitting types.

Hand-tight installation with O-ring seal

Thread the fitting into a G1/4 port, slide the soft tube over the barb, and tighten the compression collar by hand. The captured O-ring seals the tube end without tools. The usual mistake is under-tightening the collar, which can allow seepage once the loop is pressurised.

Pontos fortes

  • White brass fittings resist corrosion for lasting loop reliability
  • G1/4 threads accept 3/8 ID 1/2 OD soft tubing for flexible routing
  • Embedded O-ring design creates leakproof seal under pressure
  • Two-pack supplies matching fittings for inlet and outlet runs
  • Zero-decibel passive components add no acoustic noise to the system

Especificações

BrandgreenDracaena
SeriesSoft Tube 1/2" OD (White)
ModelD-RGKN-B38-White-2
Part NumberD-RGKN-B38-White-2
TypeWater
Block CompatibilityDesktop
Block Compatibility - AMDDesktop
Block Compatibility - IntelDesktop
Pump Noise0 decibels
Radiator Size2 pcs
Fan Size2 pcs
Fan Dim.0.86 in x 0.7 in x 0.86 in
Fan Noise0 decibels
ColorWhite
LED ColorSoft Tube 1/2" OD (White)
Package ContentsO-rings

Perguntas sobre este artigo

What tubing dimensions do I need to connect these G1/4 fittings?

These fittings accept soft tubing with a 3/8 inch inner diameter and 1/2 inch outer diameter, matching the 10×13 mm specification.

Will these white fittings thread into the G1/4 ports on my existing radiator and water blocks?

Yes, the G1/4 thread is the standard size used on most desktop radiators, blocks and pumps, so they will screw directly into those ports.

How can I verify the compression seal is holding after I assemble the loop?

Pressure-test the loop with the system powered off; the embedded O-rings should show no drips or pressure loss over several minutes.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.