Lirealar
Lirealar TF8 Thermal Paste 13.8 W/mK 2.0g
High-conductivity carbon-based paste rated at 13.8 W/mK, non-conductive and non-corrosive, with a 2.0 g syringe and applicator for CPU and GPU cooling
- Volume / Net Weight2.0g
- Thermal Conductivity13.8 W/mK,
- Long Term Operating Temperature-220~380°C
- SpecificationsColor:Gray Thermal resistance:<0.01(°C-CM²/W) Density:2.9(25
- FeaturesHigh Thermal Conductivity 13.8 W/mK Non-Elecnical Conducive
Type Thermal Paste
- Thermal Pad
- Thermal Paste
Üzeri çizili sürümler mevcuttur ancak burada stokta değildir.
- High thermal conductivity of 13.8 W/mK moves heat efficiently from CPU and GPU
- Non-electrically conductive carbon formula prevents short circuits on sensitive components
- Non-corrosive, non-curing and non-toxic paste stays safe for long-term use
- Easy-apply consistency fills microscopic gaps without voids even for first-time builders
- Stable performance rated for at least six years without re-application needed
Carbon-based thermal compound
Lirealar TF8 is a carbon-based thermal compound with a rated conductivity of 13.8 W/mK. The 2.0 g syringe is intended for CPU, GPU and LED cooler interfaces on desktops and laptops. It is non-electrically conductive, non-corrosive and non-curing. The manufacturer states a service life of at least six years.
Who this suits and who it does not
Builders who need a non-conductive paste for standard processor and graphics card installations will find it straightforward to apply. Users who require a larger volume for multiple builds or a metal-based compound with higher conductivity should consider other options.
Thermal conductivity rating
The single figure that determines suitability is the 13.8 W/mK thermal conductivity. Match this value against the cooling requirement of your specific processor or graphics card before purchasing.
Öne çıkanlar
- High thermal conductivity of 13.8 W/mK moves heat efficiently from CPU and GPU
- Non-electrically conductive carbon formula prevents short circuits on sensitive components
- Non-corrosive, non-curing and non-toxic paste stays safe for long-term use
- Easy-apply consistency fills microscopic gaps without voids even for first-time builders
- Stable performance rated for at least six years without re-application needed
Teknik özellikler
| Series | Thermal Paste |
|---|---|
| Model | TF8 Thermal Compound Paste |
| Volume / Net Weight | 2.0g |
| Thermal Conductivity | 13.8 W/mK, |
| Long Term Operating Temperature | -220~380°C |
| Specifications | Color:Gray Thermal resistance:<0.01(°C-CM²/W) Density:2.9(25°C) Operating temperature:-220~380°C Electrical conductivity:NO Harmless:YES Content: 12.8g |
| Features | High Thermal Conductivity 13.8 W/mK Non-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi lnsulation does not conduct electricity and is safe for use It will last At least for 6 years |
Bu modelin diğer sürümleri
Aynı seriden 5 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
Lirealar
Lirealar TF4 Carbon Thermal Paste 9.5 W/mK 1g 2pcs with Tool
- 1g 2Pcs
- 9.5 W/mK,
$9,99
0.00012771BTC
Stokta
Bu ürünle ilgili sorular
Will the 13.8 W/mK TF8 paste work safely on an older CPU with a copper heat spreader?
Yes, the carbon-based compound is non-corrosive and non-electrically conductive, so it will not damage copper or aluminium surfaces on legacy processors.
How can I confirm the paste is performing correctly after I apply it?
Monitor CPU or GPU temperatures under load; the low thermal resistance below 0.01 °C-cm²/W and 13.8 W/mK conductivity should yield noticeably lower peak temps versus worn-out paste.
Does the 2.0 g syringe include a spreading tool, or must I buy one separately?
The retail pack ships with an application tool in the box, so no extra purchase is needed for installation.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
$0,82
0.00001048BTC
Stokta