Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Black 70mm square Maglev fan, 20mm thick, three-pin connector

OEM Industries

OEM Industries DA07020R12U 70mm Maglev 3 Pin CPU cooler

SKU CH-TMWS-SV2DE

A 70 mm Maglev fan with a 12 V, 0.7 A three-pin connector for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • 70 mm Maglev bearing reduces friction and noise for quieter operation
  • 12 V 0.7 A power draw keeps energy use low
  • 3-pin connector fits standard motherboard headers without adapters
  • 20 mm thick square frame suits compact cases and tight clearances
  • LED-free design avoids light bleed in minimalist builds

Compact 70 mm Maglev cooler

The OEM Industries DA07020R12U is a 70 mm square fan unit with a Maglev bearing and a 3 pin power connector. It draws 0.7 A at 12 V and has no LED lighting. The cooler is intended for low-profile CPU sockets or tight chassis where a 7020 form factor fits.

Simple 3 pin installation

Mount the fan using the four corner holes on the 70 mm frame and plug the 3 wire connector into a standard motherboard header. The Maglev bearing reduces friction, so the only common issue is cable reach in deeper cases. Ensure the header supplies 12 V for full speed operation.

Verify clearance and header type

Measure the available height above the socket to confirm the 20 mm thickness clears nearby components. Check that the motherboard provides a 3 pin fan header; a 4 pin header will work but speed control will be voltage-based. Confirm the mounting hole pattern matches the 70 mm square layout.

Öne çıkanlar

  • 70 mm Maglev bearing reduces friction and noise for quieter operation
  • 12 V 0.7 A power draw keeps energy use low
  • 3-pin connector fits standard motherboard headers without adapters
  • 20 mm thick square frame suits compact cases and tight clearances
  • LED-free design avoids light bleed in minimalist builds

Teknik özellikler

ModelDA07020R12U
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

Bu ürünle ilgili sorular

How can I confirm the 70mm Maglev fan is spinning correctly after installation?

Connect the 3 Pin connector to a 12V header and verify the fan rotates smoothly; the maglev bearing should run quietly at 0.7A draw.

What comes in the box and do I need a separate heatsink?

The package contains only the 70x20mm square fan unit; a compatible heatsink or mounting hardware must be purchased separately.

Which DA07020R12U version should I choose for a 12V 3 Pin header?

This model is the 12V 0.7A 3 Pin variant; select it when your motherboard or controller provides a standard 3 Pin 12V connection.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.