Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 70mm square Maglev fan, 20mm thick, three-pin connector

OEM Industries

OEM Industries DA07020R12U 70mm Maglev 3 Pin CPU cooler

SKU CH-TMWS-SV2DE

A 70 mm Maglev fan with a 12 V, 0.7 A three-pin connector for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • 70 mm Maglev bearing reduces friction and noise for quieter operation
  • 12 V 0.7 A power draw keeps energy use low
  • 3-pin connector fits standard motherboard headers without adapters
  • 20 mm thick square frame suits compact cases and tight clearances
  • LED-free design avoids light bleed in minimalist builds

Compact 70 mm Maglev cooler

The OEM Industries DA07020R12U is a 70 mm square fan unit with a Maglev bearing and a 3 pin power connector. It draws 0.7 A at 12 V and has no LED lighting. The cooler is intended for low-profile CPU sockets or tight chassis where a 7020 form factor fits.

Simple 3 pin installation

Mount the fan using the four corner holes on the 70 mm frame and plug the 3 wire connector into a standard motherboard header. The Maglev bearing reduces friction, so the only common issue is cable reach in deeper cases. Ensure the header supplies 12 V for full speed operation.

Verify clearance and header type

Measure the available height above the socket to confirm the 20 mm thickness clears nearby components. Check that the motherboard provides a 3 pin fan header; a 4 pin header will work but speed control will be voltage-based. Confirm the mounting hole pattern matches the 70 mm square layout.

Helstu kostir

  • 70 mm Maglev bearing reduces friction and noise for quieter operation
  • 12 V 0.7 A power draw keeps energy use low
  • 3-pin connector fits standard motherboard headers without adapters
  • 20 mm thick square frame suits compact cases and tight clearances
  • LED-free design avoids light bleed in minimalist builds

Tæknilýsing

ModelDA07020R12U
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

Spurningar um þessa vöru

How can I confirm the 70mm Maglev fan is spinning correctly after installation?

Connect the 3 Pin connector to a 12V header and verify the fan rotates smoothly; the maglev bearing should run quietly at 0.7A draw.

What comes in the box and do I need a separate heatsink?

The package contains only the 70x20mm square fan unit; a compatible heatsink or mounting hardware must be purchased separately.

Which DA07020R12U version should I choose for a 12V 3 Pin header?

This model is the 12V 0.7A 3 Pin variant; select it when your motherboard or controller provides a standard 3 Pin 12V connection.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.