Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Coiled orange UV tubing 10ft 16mm OD

PrimoChill

PrimoChill PrimoFlex Advanced LRT Tubing 7/16in ID 5/8in OD UV Pearl Orange 10ft diy cooling

SKU CH-XA65-BHS7Q

Flexible PVC tubing with a low-radius bend rating and glass-like clarity for custom water-cooling loops, supplied in a 10 ft length with 7/16 in ID and 5/8 in OD

  • TypeTubing
  • Tube Dim.7/16" x 5/8"

Color Orange

  • Blue
  • Black
  • White
  • Orange
  • Purple
  • Yellow
  • Clear
  • Blood Red

Üzeri çizili sürümler mevcuttur ancak burada stokta değildir.

  • Tight bends without kinking thanks to Low Radius Technology
  • Smooth inner walls reduce bacterial growth and contamination
  • Glass-like clarity with zero printing on the tube
  • DEHP-free and phthalate-free PVC with FDA-approved ingredients
  • Includes 10 ft of tubing plus SysPrep and Liquid Utopia

Tubing for custom water-cooling loops

PrimoChill PrimoFlex Advanced LRT tubing is made for builders assembling a custom liquid-cooling loop. The 10 ft length of flexible PVC tubing fits 7/16 in ID and 5/8 in OD fittings and uses FDA-approved, phthalate-free material. It ships with SysPrep and Liquid Utopia pre-treatment fluids included.

Low-radius bend performance under sustained pressure

Proprietary low-durometer PVC blended with a rigid polymer resin gives the tube a tight bend ratio that resists kinking and collapse during long-term operation. Smooth inner walls inhibit particulate build-up and bacterial growth, helping the loop stay clean and maintain flow rates over extended use.

Check fitting compatibility and loop layout first

Verify that every compression or barb fitting in your build matches the 7/16 in inner and 5/8 in outer diameters before ordering. Plan the routing to confirm the 10 ft roll provides enough length for all runs, including any tight bends the low-radius design is intended to handle.

Öne çıkanlar

  • Tight bends without kinking thanks to Low Radius Technology
  • Smooth inner walls reduce bacterial growth and contamination
  • Glass-like clarity with zero printing on the tube
  • DEHP-free and phthalate-free PVC with FDA-approved ingredients
  • Includes 10 ft of tubing plus SysPrep and Liquid Utopia

Teknik özellikler

TypeTubing
Tube Dim.7/16" x 5/8"

Bu modelin diğer sürümleri

Aynı seriden 2 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How does the PrimoFlex Advanced LRT tubing handle heat buildup inside a loop that runs all day?

The low-durometer PVC blend resists softening and collapse even after prolonged exposure to typical coolant temperatures, keeping the bore open so flow stays steady.

Which fittings are required to connect the 7/16 in ID by 5/8 in OD tubing?

You need compression or barbed fittings sized for 7/16 inch inner diameter and 5/8 inch outer diameter; the pack includes no fittings.

Will the tubing kink when routed around older rigid-angled fittings or tight CPU blocks?

Low Radius Technology gives a tight bend ratio that resists kinking and twisting around sharp corners and legacy components.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.