暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Coiled orange UV tubing 10ft 16mm OD

PrimoChill

PrimoChill PrimoFlex Advanced LRT Tubing 7/16in ID 5/8in OD UV Pearl Orange 10ft diy cooling

SKU CH-XA65-BHS7Q

Flexible PVC tubing with a low-radius bend rating and glass-like clarity for custom water-cooling loops, supplied in a 10 ft length with 7/16 in ID and 5/8 in OD

  • TypeTubing
  • Tube Dim.7/16" x 5/8"

Color Orange

  • Blue
  • Black
  • White
  • Orange
  • Purple
  • Yellow
  • Clear
  • Blood Red

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Tight bends without kinking thanks to Low Radius Technology
  • Smooth inner walls reduce bacterial growth and contamination
  • Glass-like clarity with zero printing on the tube
  • DEHP-free and phthalate-free PVC with FDA-approved ingredients
  • Includes 10 ft of tubing plus SysPrep and Liquid Utopia

Tubing for custom water-cooling loops

PrimoChill PrimoFlex Advanced LRT tubing is made for builders assembling a custom liquid-cooling loop. The 10 ft length of flexible PVC tubing fits 7/16 in ID and 5/8 in OD fittings and uses FDA-approved, phthalate-free material. It ships with SysPrep and Liquid Utopia pre-treatment fluids included.

Low-radius bend performance under sustained pressure

Proprietary low-durometer PVC blended with a rigid polymer resin gives the tube a tight bend ratio that resists kinking and collapse during long-term operation. Smooth inner walls inhibit particulate build-up and bacterial growth, helping the loop stay clean and maintain flow rates over extended use.

Check fitting compatibility and loop layout first

Verify that every compression or barb fitting in your build matches the 7/16 in inner and 5/8 in outer diameters before ordering. Plan the routing to confirm the 10 ft roll provides enough length for all runs, including any tight bends the low-radius design is intended to handle.

特長

  • Tight bends without kinking thanks to Low Radius Technology
  • Smooth inner walls reduce bacterial growth and contamination
  • Glass-like clarity with zero printing on the tube
  • DEHP-free and phthalate-free PVC with FDA-approved ingredients
  • Includes 10 ft of tubing plus SysPrep and Liquid Utopia

仕様

TypeTubing
Tube Dim.7/16" x 5/8"

このモデルの他のバージョン

同シリーズにさらに 2点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How does the PrimoFlex Advanced LRT tubing handle heat buildup inside a loop that runs all day?

The low-durometer PVC blend resists softening and collapse even after prolonged exposure to typical coolant temperatures, keeping the bore open so flow stays steady.

Which fittings are required to connect the 7/16 in ID by 5/8 in OD tubing?

You need compression or barbed fittings sized for 7/16 inch inner diameter and 5/8 inch outer diameter; the pack includes no fittings.

Will the tubing kink when routed around older rigid-angled fittings or tight CPU blocks?

Low Radius Technology gives a tight bend ratio that resists kinking and twisting around sharp corners and legacy components.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。