Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Coiled orange UV tubing 10ft 16mm OD

PrimoChill

PrimoChill PrimoFlex Advanced LRT Tubing 7/16in ID 5/8in OD UV Pearl Orange 10ft diy cooling

SKU CH-XA65-BHS7Q

Flexible PVC tubing with a low-radius bend rating and glass-like clarity for custom water-cooling loops, supplied in a 10 ft length with 7/16 in ID and 5/8 in OD

  • TypeTubing
  • Tube Dim.7/16" x 5/8"

Color Orange

  • Blue
  • Black
  • White
  • Orange
  • Purple
  • Yellow
  • Clear
  • Blood Red

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Tight bends without kinking thanks to Low Radius Technology
  • Smooth inner walls reduce bacterial growth and contamination
  • Glass-like clarity with zero printing on the tube
  • DEHP-free and phthalate-free PVC with FDA-approved ingredients
  • Includes 10 ft of tubing plus SysPrep and Liquid Utopia

Tubing for custom water-cooling loops

PrimoChill PrimoFlex Advanced LRT tubing is made for builders assembling a custom liquid-cooling loop. The 10 ft length of flexible PVC tubing fits 7/16 in ID and 5/8 in OD fittings and uses FDA-approved, phthalate-free material. It ships with SysPrep and Liquid Utopia pre-treatment fluids included.

Low-radius bend performance under sustained pressure

Proprietary low-durometer PVC blended with a rigid polymer resin gives the tube a tight bend ratio that resists kinking and collapse during long-term operation. Smooth inner walls inhibit particulate build-up and bacterial growth, helping the loop stay clean and maintain flow rates over extended use.

Check fitting compatibility and loop layout first

Verify that every compression or barb fitting in your build matches the 7/16 in inner and 5/8 in outer diameters before ordering. Plan the routing to confirm the 10 ft roll provides enough length for all runs, including any tight bends the low-radius design is intended to handle.

Přednosti

  • Tight bends without kinking thanks to Low Radius Technology
  • Smooth inner walls reduce bacterial growth and contamination
  • Glass-like clarity with zero printing on the tube
  • DEHP-free and phthalate-free PVC with FDA-approved ingredients
  • Includes 10 ft of tubing plus SysPrep and Liquid Utopia

Specifikace

TypeTubing
Tube Dim.7/16" x 5/8"

Další verze tohoto modelu

Dalších 2 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How does the PrimoFlex Advanced LRT tubing handle heat buildup inside a loop that runs all day?

The low-durometer PVC blend resists softening and collapse even after prolonged exposure to typical coolant temperatures, keeping the bore open so flow stays steady.

Which fittings are required to connect the 7/16 in ID by 5/8 in OD tubing?

You need compression or barbed fittings sized for 7/16 inch inner diameter and 5/8 inch outer diameter; the pack includes no fittings.

Will the tubing kink when routed around older rigid-angled fittings or tight CPU blocks?

Low Radius Technology gives a tight bend ratio that resists kinking and twisting around sharp corners and legacy components.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.