Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Coiled orange UV tubing 10ft 16mm OD

PrimoChill

PrimoChill PrimoFlex Advanced LRT Tubing 7/16in ID 5/8in OD UV Pearl Orange 10ft diy cooling

SKU CH-XA65-BHS7Q

Flexible PVC tubing with a low-radius bend rating and glass-like clarity for custom water-cooling loops, supplied in a 10 ft length with 7/16 in ID and 5/8 in OD

  • TypeTubing
  • Tube Dim.7/16" x 5/8"

Color Orange

  • Blue
  • Black
  • White
  • Orange
  • Purple
  • Yellow
  • Clear
  • Blood Red

Prečrtane različice obstajajo, vendar tukaj niso na voljo.

  • Tight bends without kinking thanks to Low Radius Technology
  • Smooth inner walls reduce bacterial growth and contamination
  • Glass-like clarity with zero printing on the tube
  • DEHP-free and phthalate-free PVC with FDA-approved ingredients
  • Includes 10 ft of tubing plus SysPrep and Liquid Utopia

Tubing for custom water-cooling loops

PrimoChill PrimoFlex Advanced LRT tubing is made for builders assembling a custom liquid-cooling loop. The 10 ft length of flexible PVC tubing fits 7/16 in ID and 5/8 in OD fittings and uses FDA-approved, phthalate-free material. It ships with SysPrep and Liquid Utopia pre-treatment fluids included.

Low-radius bend performance under sustained pressure

Proprietary low-durometer PVC blended with a rigid polymer resin gives the tube a tight bend ratio that resists kinking and collapse during long-term operation. Smooth inner walls inhibit particulate build-up and bacterial growth, helping the loop stay clean and maintain flow rates over extended use.

Check fitting compatibility and loop layout first

Verify that every compression or barb fitting in your build matches the 7/16 in inner and 5/8 in outer diameters before ordering. Plan the routing to confirm the 10 ft roll provides enough length for all runs, including any tight bends the low-radius design is intended to handle.

Poudarki

  • Tight bends without kinking thanks to Low Radius Technology
  • Smooth inner walls reduce bacterial growth and contamination
  • Glass-like clarity with zero printing on the tube
  • DEHP-free and phthalate-free PVC with FDA-approved ingredients
  • Includes 10 ft of tubing plus SysPrep and Liquid Utopia

Specifikacije

TypeTubing
Tube Dim.7/16" x 5/8"

Druge različice tega modela

še 2 v isti paleti

Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.

Vprašanja o tem izdelku

How does the PrimoFlex Advanced LRT tubing handle heat buildup inside a loop that runs all day?

The low-durometer PVC blend resists softening and collapse even after prolonged exposure to typical coolant temperatures, keeping the bore open so flow stays steady.

Which fittings are required to connect the 7/16 in ID by 5/8 in OD tubing?

You need compression or barbed fittings sized for 7/16 inch inner diameter and 5/8 inch outer diameter; the pack includes no fittings.

Will the tubing kink when routed around older rigid-angled fittings or tight CPU blocks?

Low Radius Technology gives a tight bend ratio that resists kinking and twisting around sharp corners and legacy components.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.