be quiet! Dark Power 14 1000W ATX 3.1 power supply BP020US
- Black
- ATX 3.1
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
be quiet!
An 850 W ATX 3.1 power supply with 80 Plus Titanium efficiency up to 95.6 percent, PCIe 5.1 support and a 135 mm Silent Wings fan offering active or semi-passive cooling
Option Dark Power 14 850W
The be quiet! Dark Power 14 delivers 850 W of continuous power for high-end desktop builds. It meets the ATX 3.1 specification and carries 80 PLUS Titanium certification with up to 95.6 % efficiency. The fully modular design suits enthusiasts who want clean cable routing and reliable energy delivery.
A 135 mm Silent Wings fan works alongside an aluminium heatsink to support active or semi-passive cooling modes selectable by a button. Full bridge, synchronous rectifier and LLC topology provide stable voltage regulation across loads. Modular connectors include a 20+4 pin main cable, native 12V-2x6 for PCIe 5.1 graphics cards and 6+2 pin PCIe plugs for broader GPU compatibility.
The ATX 3.1 standard defines the 12V-2x6 connector for up to 600 W per cable, so a single cable can feed modern GPUs without adapters. Titanium efficiency reduces waste heat, allowing the semi-passive mode to stay silent longer under typical loads. The 10 year manufacturer warranty reflects the confidence in component longevity under these electrical limits.
| Brand | be quiet |
|---|---|
| Series | Dark Power 14 |
| Model | Dark Power 14 | 850 W |
| Part Number | 4260052192047 |
| Color | Black |
| Type | ATX 3.1 |
| Maximum Power | 850 W |
| Fans | 1 x 135 mm |
| Main Connector | 20+4Pin |
| Modular | Modular |
| Dimensions | 17.5 x 15 x 8.6cm |
| Weight | 2.2kg |
| Тегло на пратката | 4.42 kg |
| Размери на опаковката | 356 × 235 × 127 mm |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
The ATX 3.1 design includes a native 12V-2x6 connector that delivers up to 600W to a PCIe 5.1 graphics card without an adapter, while the 850W total capacity leaves headroom for the rest of the system.
The dimensions match the ATX form factor, so the unit fits any case with a standard PSU bay; allow clearance for the 135mm fan and modular cable plugs at the rear.
Press the button on the PSU rear to toggle modes; the mistake is forgetting to verify the LED indicator matches the desired mode before closing the case.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?