be quiet! Dark Power 14 1000W ATX 3.1 power supply BP020US
- Black
- ATX 3.1
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
be quiet!
An 850 W ATX 3.1 power supply with 80 Plus Titanium efficiency up to 95.6 percent, PCIe 5.1 support and a 135 mm Silent Wings fan offering active or semi-passive cooling
Option Dark Power 14 850W
The be quiet! Dark Power 14 delivers 850 W of continuous power for high-end desktop builds. It meets the ATX 3.1 specification and carries 80 PLUS Titanium certification with up to 95.6 % efficiency. The fully modular design suits enthusiasts who want clean cable routing and reliable energy delivery.
A 135 mm Silent Wings fan works alongside an aluminium heatsink to support active or semi-passive cooling modes selectable by a button. Full bridge, synchronous rectifier and LLC topology provide stable voltage regulation across loads. Modular connectors include a 20+4 pin main cable, native 12V-2x6 for PCIe 5.1 graphics cards and 6+2 pin PCIe plugs for broader GPU compatibility.
The ATX 3.1 standard defines the 12V-2x6 connector for up to 600 W per cable, so a single cable can feed modern GPUs without adapters. Titanium efficiency reduces waste heat, allowing the semi-passive mode to stay silent longer under typical loads. The 10 year manufacturer warranty reflects the confidence in component longevity under these electrical limits.
| Brand | be quiet |
|---|---|
| Series | Dark Power 14 |
| Model | Dark Power 14 | 850 W |
| Part Number | 4260052192047 |
| Color | Black |
| Type | ATX 3.1 |
| Maximum Power | 850 W |
| Fans | 1 x 135 mm |
| Main Connector | 20+4Pin |
| Modular | Modular |
| Dimensions | 17.5 x 15 x 8.6cm |
| Weight | 2.2kg |
| وزن الشحنة | 4.42 kg |
| أبعاد الطرد | 356 × 235 × 127 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The ATX 3.1 design includes a native 12V-2x6 connector that delivers up to 600W to a PCIe 5.1 graphics card without an adapter, while the 850W total capacity leaves headroom for the rest of the system.
The dimensions match the ATX form factor, so the unit fits any case with a standard PSU bay; allow clearance for the 135mm fan and modular cable plugs at the rear.
Press the button on the PSU rear to toggle modes; the mistake is forgetting to verify the LED indicator matches the desired mode before closing the case.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟