Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Two green DDR2 FB-DIMM sticks, 240-pin, no heat spreader

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR2 5300 667MHz ECC FB-DIMM - B54

SKU CH-4P1C-W6WHR

8GB (2×4GB) DDR2 667MHz ECC fully buffered DIMM kit for Dell PowerEdge SC1430 servers

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • ECC protection safeguards data integrity on the Dell PowerEdge SC1430
  • Fully buffered architecture stabilises signals for reliable server operation
  • DDR2-667 speed matches the system memory bus for correct timing
  • 2x4GB kit fills two slots to reach 8GB total capacity
  • 240-pin form factor fits the SC1430 memory sockets exactly

Fully Buffered DDR2 for Dell PowerEdge SC1430

This 8 GB kit supplies two 4 GB DDR2-667 fully buffered ECC modules built for the Dell PowerEdge SC1430 server. The 240-pin FB-DIMMs run at 1.8 V with CL5 timing and a 2Rx4 organisation. They are intended for administrators upgrading or repairing that specific platform.

Replaces lower-capacity

The server supports up to 16 GB across four sockets, so this kit fills half the maximum configuration. The jump is worthwhile when the system currently runs with 4 GB or less, or when existing modules show errors and ECC protection is required for data integrity.

Verify FB-DIMM slots and DDR2 requirement before

The PowerEdge SC1430 accepts only fully buffered DDR2 memory; standard registered or unbuffered DDR2 will not function. Confirm the server has free 240-pin FB-DIMM slots and that the BIOS is current enough to recognise 4 GB ranks. This kit is not suitable for any desktop or non-FB-DIMM platform.

Акценти

  • ECC protection safeguards data integrity on the Dell PowerEdge SC1430
  • Fully buffered architecture stabilises signals for reliable server operation
  • DDR2-667 speed matches the system memory bus for correct timing
  • 2x4GB kit fills two slots to reach 8GB total capacity
  • 240-pin form factor fits the SC1430 memory sockets exactly

Спецификации

BrandComputer Memory Solutions
ModelCM512725300FBDIMM
Capacity8GB (2 x 4GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCYes
Buffered/RegisteredFully Buffered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Poweredge Sc1430
Package Content2 Memory RAM Sticks

Въпроси за този артикул

Will the 240-pin DDR2 FB-DIMM modules fit the Dell PowerEdge SC1430 memory slots?

Yes, the 240-pin fully buffered DDR2 DIMMs are built for the SC1430's four registered memory sockets and will seat correctly in each slot.

What is the correct order for installing the two 4 GB sticks in the SC1430?

Populate the lowest-numbered sockets first, typically DIMM 1 and DIMM 2, so the memory controller initialises both channels in the proper sequence.

When should the ECC FB-DIMM kit be replaced in a Dell PowerEdge SC1430?

Replace the modules if the server logs correctable ECC errors that become uncorrectable, or if diagnostics report a persistent failure on either 4 GB stick.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.