SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501407BTC
재고 있음
Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR2 5300 667MHz ECC FB-DIMM - B54
8GB (2×4GB) DDR2 667MHz ECC fully buffered DIMM kit for Dell PowerEdge SC1430 servers
- Capacity8GB (2 x 4GB)
- Type240-Pin DDR2 SDRAM
- SpeedDDR2 667 (PC2 5300)
- CAS LatencyCL5
- Timing5-5-5
- Voltage1.8V
- ECC protection safeguards data integrity on the Dell PowerEdge SC1430
- Fully buffered architecture stabilises signals for reliable server operation
- DDR2-667 speed matches the system memory bus for correct timing
- 2x4GB kit fills two slots to reach 8GB total capacity
- 240-pin form factor fits the SC1430 memory sockets exactly
Fully Buffered DDR2 for Dell PowerEdge SC1430
This 8 GB kit supplies two 4 GB DDR2-667 fully buffered ECC modules built for the Dell PowerEdge SC1430 server. The 240-pin FB-DIMMs run at 1.8 V with CL5 timing and a 2Rx4 organisation. They are intended for administrators upgrading or repairing that specific platform.
Replaces lower-capacity
The server supports up to 16 GB across four sockets, so this kit fills half the maximum configuration. The jump is worthwhile when the system currently runs with 4 GB or less, or when existing modules show errors and ECC protection is required for data integrity.
Verify FB-DIMM slots and DDR2 requirement before
The PowerEdge SC1430 accepts only fully buffered DDR2 memory; standard registered or unbuffered DDR2 will not function. Confirm the server has free 240-pin FB-DIMM slots and that the BIOS is current enough to recognise 4 GB ranks. This kit is not suitable for any desktop or non-FB-DIMM platform.
주요 특징
- ECC protection safeguards data integrity on the Dell PowerEdge SC1430
- Fully buffered architecture stabilises signals for reliable server operation
- DDR2-667 speed matches the system memory bus for correct timing
- 2x4GB kit fills two slots to reach 8GB total capacity
- 240-pin form factor fits the SC1430 memory sockets exactly
사양
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM512725300FBDIMM |
| Capacity | 8GB (2 x 4GB) |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Timing | 5-5-5 |
| Voltage | 1.8V |
| ECC | Yes |
| Buffered/Registered | Fully Buffered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Poweredge Sc1430 |
| Package Content | 2 Memory RAM Sticks |
이 상품에 대한 질문
Will the 240-pin DDR2 FB-DIMM modules fit the Dell PowerEdge SC1430 memory slots?
Yes, the 240-pin fully buffered DDR2 DIMMs are built for the SC1430's four registered memory sockets and will seat correctly in each slot.
What is the correct order for installing the two 4 GB sticks in the SC1430?
Populate the lowest-numbered sockets first, typically DIMM 1 and DIMM 2, so the memory controller initialises both channels in the proper sequence.
When should the ECC FB-DIMM kit be replaced in a Dell PowerEdge SC1430?
Replace the modules if the server logs correctable ECC errors that become uncorrectable, or if diagnostics report a persistent failure on either 4 GB stick.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
