G.SKILL Aegis F4-3200C16D-16GIS 16GB (2×8GB) DDR4 3200 CL16 desktop RAM
- 16GB (2 x 8GB)
- 288-Pin PC RAM
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
G.SKILL
16GB DDR4 module running at 2400MHz with CL15 timings and 1.20V operation
Capacity 16GB
Speed DDR4 2400 (PC4 19200)
This 16GB DDR4 module runs at 2400 MT/s with CL15 15-15-15-35 timings at 1.20V. It is an unbuffered DIMM built for desktop gaming rigs and enthusiast systems. Intel XMP 2.0 support lets the BIOS apply the rated profile automatically.
Moving up from a 2133 MT/s kit or a lower-capacity stick adds bandwidth and reduces latency for gaming workloads. The jump is worthwhile when the motherboard and CPU memory controller can sustain 2400 MT/s without downclocking. Mixing this stick with unmatched kits will result in the system running at the lowest common speed and timing.
Align the notch, press firmly until the retention clips click, then enable XMP 2.0 in the BIOS to reach the rated 2400 MT/s CL15 profile. Common issues include leaving the profile disabled so the module stays at JEDEC defaults, or populating slots in the wrong order for dual-channel operation on the specific board.
| Brand | G.SKILL |
|---|---|
| Series | Aegis |
| Model | F4-2400C15S-16GIS |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Timing | 15-15-15-35 |
| Voltage | 1.20V |
| Buffered/Registered | Unbuffered |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Features | Performance DDR4 memory designed for gaming and PC enthusiasts Intel XMP 2.0 Support Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the rated XMP overclock speed and system stability will depend o |
| Recommend Use | AMD X570 / X470 / X370 / B550 / B450 / B350 Intel X99 / X299 / Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170 |
| Тегло на пратката | 0.04 kg |
| Размери на опаковката | 151 × 62 × 15 mm |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
Yes, the module uses the standard 288-pin DDR4 desktop form factor and requires a compatible motherboard DIMM slot.
Enable the Intel XMP 2.0 profile in the motherboard BIOS; the common mistake is leaving the board at default JEDEC speeds instead of activating the profile.
The module operates at 1.20V when running at the rated DDR4 2400 CL15 15-15-15-35 specification.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?