G.SKILL Aegis F4-2666C19S-8GIS 8GB DDR4 2666 CL19 desktop RAM
- 8GB
- DDR4 2666 (PC4 2130…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
G.SKILL
16GB DDR4 module running at 2400MHz with CL15 timings and 1.20V operation
Capacity 16GB
Speed DDR4 2400 (PC4 19200)
This 16GB DDR4 module runs at 2400 MT/s with CL15 15-15-15-35 timings at 1.20V. It is an unbuffered DIMM built for desktop gaming rigs and enthusiast systems. Intel XMP 2.0 support lets the BIOS apply the rated profile automatically.
Moving up from a 2133 MT/s kit or a lower-capacity stick adds bandwidth and reduces latency for gaming workloads. The jump is worthwhile when the motherboard and CPU memory controller can sustain 2400 MT/s without downclocking. Mixing this stick with unmatched kits will result in the system running at the lowest common speed and timing.
Align the notch, press firmly until the retention clips click, then enable XMP 2.0 in the BIOS to reach the rated 2400 MT/s CL15 profile. Common issues include leaving the profile disabled so the module stays at JEDEC defaults, or populating slots in the wrong order for dual-channel operation on the specific board.
| Brand | G.SKILL |
|---|---|
| Series | Aegis |
| Model | F4-2400C15S-16GIS |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Timing | 15-15-15-35 |
| Voltage | 1.20V |
| Buffered/Registered | Unbuffered |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Features | Performance DDR4 memory designed for gaming and PC enthusiasts Intel XMP 2.0 Support Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the rated XMP overclock speed and system stability will depend o |
| Recommend Use | AMD X570 / X470 / X370 / B550 / B450 / B350 Intel X99 / X299 / Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170 |
| Shipping weight | 0.04 kg |
| Package size | 151 × 62 × 15 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the module uses the standard 288-pin DDR4 desktop form factor and requires a compatible motherboard DIMM slot.
Enable the Intel XMP 2.0 profile in the motherboard BIOS; the common mistake is leaving the board at default JEDEC speeds instead of activating the profile.
The module operates at 1.20V when running at the rated DDR4 2400 CL15 15-15-15-35 specification.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?