G.SKILL Aegis F4-3200C16D-16GIS 16GB (2×8GB) DDR4 3200 CL16 desktop RAM
- 16GB (2 x 8GB)
- 288-Pin PC RAM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
G.SKILL
16GB DDR4 module running at 2400MHz with CL15 timings and 1.20V operation
Capacity 16GB
Speed DDR4 2400 (PC4 19200)
This 16GB DDR4 module runs at 2400 MT/s with CL15 15-15-15-35 timings at 1.20V. It is an unbuffered DIMM built for desktop gaming rigs and enthusiast systems. Intel XMP 2.0 support lets the BIOS apply the rated profile automatically.
Moving up from a 2133 MT/s kit or a lower-capacity stick adds bandwidth and reduces latency for gaming workloads. The jump is worthwhile when the motherboard and CPU memory controller can sustain 2400 MT/s without downclocking. Mixing this stick with unmatched kits will result in the system running at the lowest common speed and timing.
Align the notch, press firmly until the retention clips click, then enable XMP 2.0 in the BIOS to reach the rated 2400 MT/s CL15 profile. Common issues include leaving the profile disabled so the module stays at JEDEC defaults, or populating slots in the wrong order for dual-channel operation on the specific board.
| Brand | G.SKILL |
|---|---|
| Series | Aegis |
| Model | F4-2400C15S-16GIS |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Timing | 15-15-15-35 |
| Voltage | 1.20V |
| Buffered/Registered | Unbuffered |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Features | Performance DDR4 memory designed for gaming and PC enthusiasts Intel XMP 2.0 Support Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the rated XMP overclock speed and system stability will depend o |
| Recommend Use | AMD X570 / X470 / X370 / B550 / B450 / B350 Intel X99 / X299 / Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170 |
| Teža pošiljke | 0.04 kg |
| Velikost pošiljke | 151 × 62 × 15 mm |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
Yes, the module uses the standard 288-pin DDR4 desktop form factor and requires a compatible motherboard DIMM slot.
Enable the Intel XMP 2.0 profile in the motherboard BIOS; the common mistake is leaving the board at default JEDEC speeds instead of activating the profile.
The module operates at 1.20V when running at the rated DDR4 2400 CL15 15-15-15-35 specification.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?