Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Coiled sandstone filament spool, 2.85 mm diameter, light stone colour

Lay Filaments

Lay Filaments LAY-BRICK 3.0mm 0.75kg 3D printer filament

SKU CH-KBBW-P0PTY

Sandstone-filled filament produces a rough stone-like finish on decorative prints at 165–210 °C with a heated bed at 20–40 °C

  • Sandstone composite creates realistic stone-like textures
  • ±0.1 mm diameter tolerance ensures consistent extrusion
  • Prints at 165-210 °C on standard hardware
  • Heated bed at 20-40 °C prevents warping
  • 75 kg spool suits extended decorative prints

Stone-finish filament for decorative prints

Lay Filaments LAY-BRICK is a sandstone-based filament with a binding polymer that produces a surface texture resembling stone or ceramic. The material is intended for 3D printing decorative pieces rather than structural components. It comes on a 0.75 kg spool with a 2.85 mm filament diameter.

Consistent extrusion across long prints

The filament maintains a diameter tolerance of ±0.1 mm, which helps sustain steady flow during extended printing sessions. Recommended nozzle diameter is greater than 0.40 mm and the printing temperature range is 165 to 210 °C with a bed temperature of 20 to 40 °C.

Sandstone composite requires post-print care

Because the sandstone composite can leave residue, it is highly recommended to remove any remaining filament from the nozzle after printing to prevent blockage. The material creates a rougher surface finish that varies with print settings, and the spool weight of 0.75 kg suits smaller decorative projects.

Акценти

  • Sandstone composite creates realistic stone-like textures
  • ±0.1 mm diameter tolerance ensures consistent extrusion
  • Prints at 165-210 °C on standard hardware
  • Heated bed at 20-40 °C prevents warping
  • 75 kg spool suits extended decorative prints

Спецификации

BrandLay Filaments

Въпроси за този артикул

How hot does the nozzle need to be when printing with this sandstone filament all day?

The recommended printing temperature range is 165 to 210 degC for the sandstone and polymer blend.

Does my printer need a heated bed to use this 2.85 mm Lay-Brick filament?

A heated bed set between 20 and 40 degC is recommended for this material.

Will the 0.75 kg spool of 3.0 mm filament feed correctly on a printer that takes 2.85 mm?

The filament is specified as 2.85 mm with a tolerance of ±0.1 mm, matching that standard.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.