Lay Filaments
Lay Filaments LAY-BRICK 3.0mm 0.75kg 3D printer filament
Sandstone-filled filament produces a rough stone-like finish on decorative prints at 165–210 °C with a heated bed at 20–40 °C
- Sandstone composite creates realistic stone-like textures
- ±0.1 mm diameter tolerance ensures consistent extrusion
- Prints at 165-210 °C on standard hardware
- Heated bed at 20-40 °C prevents warping
- 75 kg spool suits extended decorative prints
Stone-finish filament for decorative prints
Lay Filaments LAY-BRICK is a sandstone-based filament with a binding polymer that produces a surface texture resembling stone or ceramic. The material is intended for 3D printing decorative pieces rather than structural components. It comes on a 0.75 kg spool with a 2.85 mm filament diameter.
Consistent extrusion across long prints
The filament maintains a diameter tolerance of ±0.1 mm, which helps sustain steady flow during extended printing sessions. Recommended nozzle diameter is greater than 0.40 mm and the printing temperature range is 165 to 210 °C with a bed temperature of 20 to 40 °C.
Sandstone composite requires post-print care
Because the sandstone composite can leave residue, it is highly recommended to remove any remaining filament from the nozzle after printing to prevent blockage. The material creates a rougher surface finish that varies with print settings, and the spool weight of 0.75 kg suits smaller decorative projects.
주요 특징
- Sandstone composite creates realistic stone-like textures
- ±0.1 mm diameter tolerance ensures consistent extrusion
- Prints at 165-210 °C on standard hardware
- Heated bed at 20-40 °C prevents warping
- 75 kg spool suits extended decorative prints
사양
| Brand | Lay Filaments |
|---|
이 상품에 대한 질문
How hot does the nozzle need to be when printing with this sandstone filament all day?
The recommended printing temperature range is 165 to 210 degC for the sandstone and polymer blend.
Does my printer need a heated bed to use this 2.85 mm Lay-Brick filament?
A heated bed set between 20 and 40 degC is recommended for this material.
Will the 0.75 kg spool of 3.0 mm filament feed correctly on a printer that takes 2.85 mm?
The filament is specified as 2.85 mm with a tolerance of ±0.1 mm, matching that standard.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
