Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Coiled sandstone filament spool, 2.85 mm diameter, light stone colour

Lay Filaments

Lay Filaments LAY-BRICK 3.0mm 0.75kg 3D printer filament

SKU CH-KBBW-P0PTY

Sandstone-filled filament produces a rough stone-like finish on decorative prints at 165–210 °C with a heated bed at 20–40 °C

  • Sandstone composite creates realistic stone-like textures
  • ±0.1 mm diameter tolerance ensures consistent extrusion
  • Prints at 165-210 °C on standard hardware
  • Heated bed at 20-40 °C prevents warping
  • 75 kg spool suits extended decorative prints

Stone-finish filament for decorative prints

Lay Filaments LAY-BRICK is a sandstone-based filament with a binding polymer that produces a surface texture resembling stone or ceramic. The material is intended for 3D printing decorative pieces rather than structural components. It comes on a 0.75 kg spool with a 2.85 mm filament diameter.

Consistent extrusion across long prints

The filament maintains a diameter tolerance of ±0.1 mm, which helps sustain steady flow during extended printing sessions. Recommended nozzle diameter is greater than 0.40 mm and the printing temperature range is 165 to 210 °C with a bed temperature of 20 to 40 °C.

Sandstone composite requires post-print care

Because the sandstone composite can leave residue, it is highly recommended to remove any remaining filament from the nozzle after printing to prevent blockage. The material creates a rougher surface finish that varies with print settings, and the spool weight of 0.75 kg suits smaller decorative projects.

Pontos fortes

  • Sandstone composite creates realistic stone-like textures
  • ±0.1 mm diameter tolerance ensures consistent extrusion
  • Prints at 165-210 °C on standard hardware
  • Heated bed at 20-40 °C prevents warping
  • 75 kg spool suits extended decorative prints

Especificações

BrandLay Filaments

Perguntas sobre este artigo

How hot does the nozzle need to be when printing with this sandstone filament all day?

The recommended printing temperature range is 165 to 210 degC for the sandstone and polymer blend.

Does my printer need a heated bed to use this 2.85 mm Lay-Brick filament?

A heated bed set between 20 and 40 degC is recommended for this material.

Will the 0.75 kg spool of 3.0 mm filament feed correctly on a printer that takes 2.85 mm?

The filament is specified as 2.85 mm with a tolerance of ±0.1 mm, matching that standard.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.