OEM Industries
OEM Industries MMF-08C24ES RP1 80mm 24V .16A 3 Pin CPU cooler
80 mm 24 V fan with dual ball bearings and three-pin connector for inverter and PLC cooling
- ColorBlack
- TypeFan only
- Fan Size80mm
- Bearing Type2 Ball
- Power Connector3 Pin
- LEDNo
- 24 V 0.16 A power draw keeps inverter load low
- 80 mm square frame fits standard 80 × 25 mm cut-outs
- Dual ball bearings extend service life in continuous operation
- Three-pin connector provides speed feedback for monitoring
- Original Melco build ensures industrial-grade reliability
Product Identity
This 80mm square fan delivers 24V DC cooling with a 2 ball bearing and a 3 pin power connector. It is built for industrial equipment such as YASKAWA PLC and ABB inverters rather than standard desktop processors.
Accessory Impact
The package contains only the fan unit itself with three wires and three pins. No mounting brackets, PWM cables or speed controllers are included, so the installer must provide any required fixation or voltage regulation hardware.
Deciding Specification
The 24V 0.16A electrical rating is the single figure that determines whether this part fits the target inverter or control cabinet. A 12V motherboard header cannot drive it and a different voltage would require a separate power source.
Акценти
- 24 V 0.16 A power draw keeps inverter load low
- 80 mm square frame fits standard 80 × 25 mm cut-outs
- Dual ball bearings extend service life in continuous operation
- Three-pin connector provides speed feedback for monitoring
- Original Melco build ensures industrial-grade reliability
Спецификации
| Model | MMF-08C24ES RP1 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 80mm |
| Bearing Type | 2 Ball |
| Power Connector | 3 Pin |
| LED | No |
Въпроси за този артикул
Will the 2 ball bearings need lubrication or replacement during the life of this 80mm fan?
The 2 ball bearing design is sealed and rated for continuous operation without user lubrication; replacement is only needed if the bearing itself fails.
What is the first limit reached when the MMF-08C24ES RP1 runs at full 24V load for extended periods?
The motor draws 0.16A at 24V, so the power supply's current capacity or thermal limit of the inverter enclosure will be reached before the fan itself overheats.
How much noise and heat does this 80mm 24V fan add when running all day inside a PLC cabinet?
With no LED and a 2 ball bearing motor drawing 0.16A, it adds minimal audible noise and only a few watts of waste heat to the cabinet airflow.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 щ.д.
0.00001039BTC
В наличност