نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black square 80mm fan with three wires and three pins

OEM Industries

OEM Industries MMF-08C24ES RP1 80mm 24V .16A 3 Pin CPU cooler

SKU CH-9DKV-157S0

80 mm 24 V fan with dual ball bearings and three-pin connector for inverter and PLC cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • LEDNo
  • 24 V 0.16 A power draw keeps inverter load low
  • 80 mm square frame fits standard 80 × 25 mm cut-outs
  • Dual ball bearings extend service life in continuous operation
  • Three-pin connector provides speed feedback for monitoring
  • Original Melco build ensures industrial-grade reliability

Product Identity

This 80mm square fan delivers 24V DC cooling with a 2 ball bearing and a 3 pin power connector. It is built for industrial equipment such as YASKAWA PLC and ABB inverters rather than standard desktop processors.

Accessory Impact

The package contains only the fan unit itself with three wires and three pins. No mounting brackets, PWM cables or speed controllers are included, so the installer must provide any required fixation or voltage regulation hardware.

Deciding Specification

The 24V 0.16A electrical rating is the single figure that determines whether this part fits the target inverter or control cabinet. A 12V motherboard header cannot drive it and a different voltage would require a separate power source.

أبرز المميزات

  • 24 V 0.16 A power draw keeps inverter load low
  • 80 mm square frame fits standard 80 × 25 mm cut-outs
  • Dual ball bearings extend service life in continuous operation
  • Three-pin connector provides speed feedback for monitoring
  • Original Melco build ensures industrial-grade reliability

المواصفات

ModelMMF-08C24ES RP1
ColorBlack
TypeFan only
Fan Size80mm
Bearing Type2 Ball
Power Connector3 Pin
LEDNo

أسئلة حول هذا المنتج

Will the 2 ball bearings need lubrication or replacement during the life of this 80mm fan?

The 2 ball bearing design is sealed and rated for continuous operation without user lubrication; replacement is only needed if the bearing itself fails.

What is the first limit reached when the MMF-08C24ES RP1 runs at full 24V load for extended periods?

The motor draws 0.16A at 24V, so the power supply's current capacity or thermal limit of the inverter enclosure will be reached before the fan itself overheats.

How much noise and heat does this 80mm 24V fan add when running all day inside a PLC cabinet?

With no LED and a 2 ball bearing motor drawing 0.16A, it adds minimal audible noise and only a few watts of waste heat to the cabinet airflow.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.