暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black square 80mm fan with three wires and three pins

OEM Industries

OEM Industries MMF-08C24ES RP1 80mm 24V .16A 3 Pin CPU cooler

SKU CH-9DKV-157S0

80 mm 24 V fan with dual ball bearings and three-pin connector for inverter and PLC cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • LEDNo
  • 24 V 0.16 A power draw keeps inverter load low
  • 80 mm square frame fits standard 80 × 25 mm cut-outs
  • Dual ball bearings extend service life in continuous operation
  • Three-pin connector provides speed feedback for monitoring
  • Original Melco build ensures industrial-grade reliability

Product Identity

This 80mm square fan delivers 24V DC cooling with a 2 ball bearing and a 3 pin power connector. It is built for industrial equipment such as YASKAWA PLC and ABB inverters rather than standard desktop processors.

Accessory Impact

The package contains only the fan unit itself with three wires and three pins. No mounting brackets, PWM cables or speed controllers are included, so the installer must provide any required fixation or voltage regulation hardware.

Deciding Specification

The 24V 0.16A electrical rating is the single figure that determines whether this part fits the target inverter or control cabinet. A 12V motherboard header cannot drive it and a different voltage would require a separate power source.

特長

  • 24 V 0.16 A power draw keeps inverter load low
  • 80 mm square frame fits standard 80 × 25 mm cut-outs
  • Dual ball bearings extend service life in continuous operation
  • Three-pin connector provides speed feedback for monitoring
  • Original Melco build ensures industrial-grade reliability

仕様

ModelMMF-08C24ES RP1
ColorBlack
TypeFan only
Fan Size80mm
Bearing Type2 Ball
Power Connector3 Pin
LEDNo

この商品に関する質問

Will the 2 ball bearings need lubrication or replacement during the life of this 80mm fan?

The 2 ball bearing design is sealed and rated for continuous operation without user lubrication; replacement is only needed if the bearing itself fails.

What is the first limit reached when the MMF-08C24ES RP1 runs at full 24V load for extended periods?

The motor draws 0.16A at 24V, so the power supply's current capacity or thermal limit of the inverter enclosure will be reached before the fan itself overheats.

How much noise and heat does this 80mm 24V fan add when running all day inside a PLC cabinet?

With no LED and a 2 ball bearing motor drawing 0.16A, it adds minimal audible noise and only a few watts of waste heat to the cabinet airflow.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。