Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Silver nickel G1/4 90-degree rotary elbow fitting with 20mm extension

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow Fitting Silver Nickel

SKU CH-H1JK-0VENY

A G1/4 90-degree rotary elbow with 20mm extension and 360-degree adjustment for custom loop routing

  • TypeFittings

Option Silver Nickel

Вижте още 9 конфигурации

Зачертаните версии съществуват, но не се предлагат тук.

  • 360° rotary lets you aim the connection in any direction
  • 90° elbow redirects tubing runs away from tight spaces
  • 20 mm extension adds clearance around nearby components
  • G1/4 brass threads ensure a secure, leak-free seal
  • Nickel finish resists corrosion for long-lasting performance

Rotary 90° Elbow for Custom Loops

The PrimoChill G1/4 rotary elbow adds a 20 mm extension and a 90 degree turn in one fitting. It suits builders who need to route tubing around tight corners or clear nearby components without extra couplers. The 360 degree rotary base lets the outlet face any direction after installation.

Thermals Noise and Power Draw

This passive brass fitting adds no heat, noise or electrical load to the loop. The nickel plating resists corrosion so coolant temperatures stay unaffected by the fitting itself. No pump head pressure is consumed beyond the minimal restriction of a 90 degree bend.

Build Integration and Clearance

The 43 mm total height and 20 mm installed base height fit standard G1/4 ports on blocks, radiators or reservoirs. Brass construction handles typical loop pressures while the rotary joint frees the builder from aligning rigid tubing precisely. Buyers who need a straight pass-through or a different thread size cannot use this part.

Акценти

  • 360° rotary lets you aim the connection in any direction
  • 90° elbow redirects tubing runs away from tight spaces
  • 20 mm extension adds clearance around nearby components
  • G1/4 brass threads ensure a secure, leak-free seal
  • Nickel finish resists corrosion for long-lasting performance

Спецификации

TypeFittings

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

How do I install the G1/4 90° rotary elbow and what step often gets missed?

Screw the male G1/4 thread into the component port until the 5 mm thread depth seats, then rotate the 360° collar to aim the female port before tightening the tubing compression fitting.

What maintenance or replacement will the nickel-plated brass fitting need later?

Inspect the nickel finish annually for wear or coolant residue; replace the fitting if the plating flakes or threads strip, otherwise it requires no scheduled service.

What limit appears first under sustained loop pressure and heat?

The 20 mm installed base height and 43 mm total height restrict clearance in tight builds, so spatial interference becomes the practical limit before the brass material fatigues.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.