Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver nickel G1/4 90-degree rotary elbow fitting with 20mm extension

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow Fitting Silver Nickel

SKU CH-H1JK-0VENY

A G1/4 90-degree rotary elbow with 20mm extension and 360-degree adjustment for custom loop routing

  • TypeFittings

Option Silver Nickel

Vedeți celelalte 9 configurații

Versiunile tăiate există, dar nu sunt disponibile aici.

  • 360° rotary lets you aim the connection in any direction
  • 90° elbow redirects tubing runs away from tight spaces
  • 20 mm extension adds clearance around nearby components
  • G1/4 brass threads ensure a secure, leak-free seal
  • Nickel finish resists corrosion for long-lasting performance

Rotary 90° Elbow for Custom Loops

The PrimoChill G1/4 rotary elbow adds a 20 mm extension and a 90 degree turn in one fitting. It suits builders who need to route tubing around tight corners or clear nearby components without extra couplers. The 360 degree rotary base lets the outlet face any direction after installation.

Thermals Noise and Power Draw

This passive brass fitting adds no heat, noise or electrical load to the loop. The nickel plating resists corrosion so coolant temperatures stay unaffected by the fitting itself. No pump head pressure is consumed beyond the minimal restriction of a 90 degree bend.

Build Integration and Clearance

The 43 mm total height and 20 mm installed base height fit standard G1/4 ports on blocks, radiators or reservoirs. Brass construction handles typical loop pressures while the rotary joint frees the builder from aligning rigid tubing precisely. Buyers who need a straight pass-through or a different thread size cannot use this part.

Puncte forte

  • 360° rotary lets you aim the connection in any direction
  • 90° elbow redirects tubing runs away from tight spaces
  • 20 mm extension adds clearance around nearby components
  • G1/4 brass threads ensure a secure, leak-free seal
  • Nickel finish resists corrosion for long-lasting performance

Specificații

TypeFittings

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I install the G1/4 90° rotary elbow and what step often gets missed?

Screw the male G1/4 thread into the component port until the 5 mm thread depth seats, then rotate the 360° collar to aim the female port before tightening the tubing compression fitting.

What maintenance or replacement will the nickel-plated brass fitting need later?

Inspect the nickel finish annually for wear or coolant residue; replace the fitting if the plating flakes or threads strip, otherwise it requires no scheduled service.

What limit appears first under sustained loop pressure and heat?

The 20 mm installed base height and 43 mm total height restrict clearance in tight builds, so spatial interference becomes the practical limit before the brass material fatigues.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.