Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Silver nickel G1/4 90-degree rotary elbow fitting with 20mm extension

PrimoChill

PrimoChill G1/4 90° Rotary 20mm Extension Elbow Fitting Silver Nickel

SKU CH-H1JK-0VENY

A G1/4 90-degree rotary elbow with 20mm extension and 360-degree adjustment for custom loop routing

  • TypeFittings

Option Silver Nickel

Mostra altre 9 configurazioni

Le versioni barrate esistono, ma non sono disponibili qui.

  • 360° rotary lets you aim the connection in any direction
  • 90° elbow redirects tubing runs away from tight spaces
  • 20 mm extension adds clearance around nearby components
  • G1/4 brass threads ensure a secure, leak-free seal
  • Nickel finish resists corrosion for long-lasting performance

Rotary 90° Elbow for Custom Loops

The PrimoChill G1/4 rotary elbow adds a 20 mm extension and a 90 degree turn in one fitting. It suits builders who need to route tubing around tight corners or clear nearby components without extra couplers. The 360 degree rotary base lets the outlet face any direction after installation.

Thermals Noise and Power Draw

This passive brass fitting adds no heat, noise or electrical load to the loop. The nickel plating resists corrosion so coolant temperatures stay unaffected by the fitting itself. No pump head pressure is consumed beyond the minimal restriction of a 90 degree bend.

Build Integration and Clearance

The 43 mm total height and 20 mm installed base height fit standard G1/4 ports on blocks, radiators or reservoirs. Brass construction handles typical loop pressures while the rotary joint frees the builder from aligning rigid tubing precisely. Buyers who need a straight pass-through or a different thread size cannot use this part.

Punti di forza

  • 360° rotary lets you aim the connection in any direction
  • 90° elbow redirects tubing runs away from tight spaces
  • 20 mm extension adds clearance around nearby components
  • G1/4 brass threads ensure a secure, leak-free seal
  • Nickel finish resists corrosion for long-lasting performance

Caratteristiche tecniche

TypeFittings

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

How do I install the G1/4 90° rotary elbow and what step often gets missed?

Screw the male G1/4 thread into the component port until the 5 mm thread depth seats, then rotate the 360° collar to aim the female port before tightening the tubing compression fitting.

What maintenance or replacement will the nickel-plated brass fitting need later?

Inspect the nickel finish annually for wear or coolant residue; replace the fitting if the plating flakes or threads strip, otherwise it requires no scheduled service.

What limit appears first under sustained loop pressure and heat?

The 20 mm installed base height and 43 mm total height restrict clearance in tight builds, so spatial interference becomes the practical limit before the brass material fatigues.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.