Black rectangular ATX power supply unit with modular cable sockets and a 120 mm fan grille

Thermaltake

Thermaltake PS-TPT-1200FNFAGU-3 1200 W ATX 3.1 power supply

SKU CH-HA27-V772T MPN PS-TPT-1200FNFAGU-3

Fully modular ATX 3.1 power supply delivering 1200 W with 80 PLUS Gold efficiency and native PCIe 5.1 12V-2x6 connectors for next-generation graphics cards

TypeATX Fully Modular
Maximum Power1200 W
PFCActive
Energy-Efficient80 PLUS GOLD Certified
Input Voltage100 - 240 V
MTBF>100,000 Hours

80 PLUS Gold certified efficiency reduces wasted energy and heat
ATX 3.1 ready design supports 200% power excursion for modern GPUs
Native PCIe 5.1 12V-2x6 connector delivers up to 600 W to next-generation graphics cards
Fully modular flat cables with colour-matched connectors simplify cable routing and airflow
120 mm hydraulic bearing fan with Smart Zero mode runs silently at low loads

146,99 щ.д. ~~187,99 щ.д.~~ −22%

0.00192181 BTC по днешния курс

В наличност · изпраща се днес

На касата курсът се заключва за 30 минути.

Доставка до Съединени щати ориентировъчно

UPS Worldwide Expedited 3–6 работни дни 39,90 щ.д.
DHL Express Worldwide 2–3 работни дни 74,90 щ.д.

Добавете още 252,01 щ.д. и стандартната доставка става безплатна.

Вносните мита се начисляват от Вашата държава при пристигане.

Доставка на друг адрес

1200 W ATX 3.1 power supply

The Thermaltake Toughpower GT 1200W is a fully modular ATX 3.1 power supply rated for 1200 W. It carries 80 PLUS Gold certification and operates on 100 - 240 V input. The unit uses Japanese main capacitors and a 120 mm hydraulic bearing fan with Smart Zero Fan control. It targets builders who need native PCIe 5.1 12V-2x6 connections for current graphics cards.

Native dual PCIe 5.1 12V-2x6 cables

Two native PCIe 5.1 12V-2x6 connectors are included, each able to deliver up to 600 W to a 12+4 pin graphics card. The flat, colour-matched modular cables reduce clutter and simplify routing. ATX 3.1 compliance brings support for 200% power excursion and 60% efficiency at low load. These features matter for systems running high-wattage GPUs that draw transient spikes.

ATX 3.1 case clearance and cable count

Verify that your case accepts a standard ATX power supply with a 120 mm fan and that the modular panel has room for the required cables. Confirm your motherboard uses a 24-pin ATX and the necessary EPS connectors, which are not detailed here. Ensure the 100 - 240 V input range matches your mains supply. Buyers who need more than two 12V-2x6 connectors or a different form factor should look elsewhere.

Акценти

80 PLUS Gold certified efficiency reduces wasted energy and heat
ATX 3.1 ready design supports 200% power excursion for modern GPUs
Native PCIe 5.1 12V-2x6 connector delivers up to 600 W to next-generation graphics cards
Fully modular flat cables with colour-matched connectors simplify cable routing and airflow
120 mm hydraulic bearing fan with Smart Zero mode runs silently at low loads

Спецификации

Brand	Thermaltake
Model	PS-TPT-1200FNFAGU-3
Type	ATX Fully Modular
Maximum Power	1200 W
PFC	Active
Energy-Efficient	80 PLUS GOLD Certified
Input Voltage	100 - 240 V
MTBF	>100,000 Hours
Color	Black
Тегло на пратката	2.93 kg
Размери на опаковката	279 × 229 × 127 mm

Въпроси за този артикул

Will the 140 mm hydraulic-bearing fan need replacing during the unit's rated life?

The fan uses a hydraulic bearing rated for continuous operation and the unit carries a mean-time-between-failures figure above 100000 hours, so replacement is unlikely within normal service.

What protection kicks in first if the 1200 W output is held continuously?

Over-temperature and over-current circuits monitor the single 12 V rail and will shut the supply down before components exceed safe limits.

How loud and hot does the 120 mm fan get during all-day load?

The Smart Zero Fan keeps the 120 mm hydraulic-bearing fan off at low load and ramps speed only as temperature rises, keeping noise and heat low during extended use.

Още от този рафт