Thermaltake
Thermaltake PS-TPT-1200FNFAGU-3 1200 W ATX 3.1 power supply
Fully modular ATX 3.1 power supply delivering 1200 W with 80 PLUS Gold efficiency and native PCIe 5.1 12V-2x6 connectors for next-generation graphics cards
- TypeATX Fully Modular
- Maximum Power1200 W
- PFCActive
- Energy-Efficient80 PLUS GOLD Certified
- Input Voltage100 - 240 V
- MTBF>100,000 Hours
- 80 PLUS Gold certified efficiency reduces wasted energy and heat
- ATX 3.1 ready design supports 200% power excursion for modern GPUs
- Native PCIe 5.1 12V-2x6 connector delivers up to 600 W to next-generation graphics cards
- Fully modular flat cables with colour-matched connectors simplify cable routing and airflow
- 120 mm hydraulic bearing fan with Smart Zero mode runs silently at low loads
1200 W ATX 3.1 power supply
The Thermaltake Toughpower GT 1200W is a fully modular ATX 3.1 power supply rated for 1200 W. It carries 80 PLUS Gold certification and operates on 100 - 240 V input. The unit uses Japanese main capacitors and a 120 mm hydraulic bearing fan with Smart Zero Fan control. It targets builders who need native PCIe 5.1 12V-2x6 connections for current graphics cards.
Native dual PCIe 5.1 12V-2x6 cables
Two native PCIe 5.1 12V-2x6 connectors are included, each able to deliver up to 600 W to a 12+4 pin graphics card. The flat, colour-matched modular cables reduce clutter and simplify routing. ATX 3.1 compliance brings support for 200% power excursion and 60% efficiency at low load. These features matter for systems running high-wattage GPUs that draw transient spikes.
ATX 3.1 case clearance and cable count
Verify that your case accepts a standard ATX power supply with a 120 mm fan and that the modular panel has room for the required cables. Confirm your motherboard uses a 24-pin ATX and the necessary EPS connectors, which are not detailed here. Ensure the 100 - 240 V input range matches your mains supply. Buyers who need more than two 12V-2x6 connectors or a different form factor should look elsewhere.
I korthet
- 80 PLUS Gold certified efficiency reduces wasted energy and heat
- ATX 3.1 ready design supports 200% power excursion for modern GPUs
- Native PCIe 5.1 12V-2x6 connector delivers up to 600 W to next-generation graphics cards
- Fully modular flat cables with colour-matched connectors simplify cable routing and airflow
- 120 mm hydraulic bearing fan with Smart Zero mode runs silently at low loads
Specifikationer
| Brand | Thermaltake |
|---|---|
| Model | PS-TPT-1200FNFAGU-3 |
| Type | ATX Fully Modular |
| Maximum Power | 1200 W |
| PFC | Active |
| Energy-Efficient | 80 PLUS GOLD Certified |
| Input Voltage | 100 - 240 V |
| MTBF | >100,000 Hours |
| Color | Black |
| Fraktvikt | 2.93 kg |
| Paketstorlek | 279 × 229 × 127 mm |
Frågor om den här produkten
Will the 140 mm hydraulic-bearing fan need replacing during the unit's rated life?
The fan uses a hydraulic bearing rated for continuous operation and the unit carries a mean-time-between-failures figure above 100000 hours, so replacement is unlikely within normal service.
What protection kicks in first if the 1200 W output is held continuously?
Over-temperature and over-current circuits monitor the single 12 V rail and will shut the supply down before components exceed safe limits.
How loud and hot does the 120 mm fan get during all-day load?
The Smart Zero Fan keeps the 120 mm hydraulic-bearing fan off at low load and ramps speed only as temperature rises, keeping noise and heat low during extended use.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 US$
0.00132961BTC
I lager
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 US$
0.00010119BTC
I lager