Thermaltake
Thermaltake PS-TPT-1200FNFAGU-3 1200 W ATX 3.1 power supply
Fully modular ATX 3.1 power supply delivering 1200 W with 80 PLUS Gold efficiency and native PCIe 5.1 12V-2x6 connectors for next-generation graphics cards
- TypeATX Fully Modular
- Maximum Power1200 W
- PFCActive
- Energy-Efficient80 PLUS GOLD Certified
- Input Voltage100 - 240 V
- MTBF>100,000 Hours
- 80 PLUS Gold certified efficiency reduces wasted energy and heat
- ATX 3.1 ready design supports 200% power excursion for modern GPUs
- Native PCIe 5.1 12V-2x6 connector delivers up to 600 W to next-generation graphics cards
- Fully modular flat cables with colour-matched connectors simplify cable routing and airflow
- 120 mm hydraulic bearing fan with Smart Zero mode runs silently at low loads
1200 W ATX 3.1 power supply
The Thermaltake Toughpower GT 1200W is a fully modular ATX 3.1 power supply rated for 1200 W. It carries 80 PLUS Gold certification and operates on 100 - 240 V input. The unit uses Japanese main capacitors and a 120 mm hydraulic bearing fan with Smart Zero Fan control. It targets builders who need native PCIe 5.1 12V-2x6 connections for current graphics cards.
Native dual PCIe 5.1 12V-2x6 cables
Two native PCIe 5.1 12V-2x6 connectors are included, each able to deliver up to 600 W to a 12+4 pin graphics card. The flat, colour-matched modular cables reduce clutter and simplify routing. ATX 3.1 compliance brings support for 200% power excursion and 60% efficiency at low load. These features matter for systems running high-wattage GPUs that draw transient spikes.
ATX 3.1 case clearance and cable count
Verify that your case accepts a standard ATX power supply with a 120 mm fan and that the modular panel has room for the required cables. Confirm your motherboard uses a 24-pin ATX and the necessary EPS connectors, which are not detailed here. Ensure the 100 - 240 V input range matches your mains supply. Buyers who need more than two 12V-2x6 connectors or a different form factor should look elsewhere.
Points forts
- 80 PLUS Gold certified efficiency reduces wasted energy and heat
- ATX 3.1 ready design supports 200% power excursion for modern GPUs
- Native PCIe 5.1 12V-2x6 connector delivers up to 600 W to next-generation graphics cards
- Fully modular flat cables with colour-matched connectors simplify cable routing and airflow
- 120 mm hydraulic bearing fan with Smart Zero mode runs silently at low loads
Caractéristiques
| Brand | Thermaltake |
|---|---|
| Model | PS-TPT-1200FNFAGU-3 |
| Type | ATX Fully Modular |
| Maximum Power | 1200 W |
| PFC | Active |
| Energy-Efficient | 80 PLUS GOLD Certified |
| Input Voltage | 100 - 240 V |
| MTBF | >100,000 Hours |
| Color | Black |
| Poids d’expédition | 2.93 kg |
| Dimensions du colis | 279 × 229 × 127 mm |
Questions sur cet article
Will the 140 mm hydraulic-bearing fan need replacing during the unit's rated life?
The fan uses a hydraulic bearing rated for continuous operation and the unit carries a mean-time-between-failures figure above 100000 hours, so replacement is unlikely within normal service.
What protection kicks in first if the 1200 W output is held continuously?
Over-temperature and over-current circuits monitor the single 12 V rail and will shut the supply down before components exceed safe limits.
How loud and hot does the 120 mm fan get during all-day load?
The Smart Zero Fan keeps the 120 mm hydraulic-bearing fan off at low load and ramps speed only as temperature rises, keeping noise and heat low during extended use.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00357046BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00420873BTC
En stock