Vetroo CF120 120mm ARGB case fan 1300 RPM 48.1 CFM yellow frame
- 1 Fan
- Case Fan
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Vetroo
A 120 mm hydro-bearing case fan pushing 48.1 CFM at 1300 RPM with green ARGB lighting and hidden screws
The Vetroo CF120 is a single 120 mm case fan with a green translucent frame and addressable RGB lighting. It targets builders who want coordinated colour accents inside a standard ATX or micro-ATX chassis. The 5 V 3-pin ARGB header connects directly to a compatible motherboard for software control. No separate controller is required.
A hydrodynamic bearing is rated for up to 50000 hours of operation while keeping noise low. The fan spins at 1300 rpm with a tolerance of ten percent and delivers a maximum airflow of 48.1 CFM. Four mounting screws are concealed by a flat front surface for a clean look. Power is split between a 3-pin motherboard header for lighting and a 4-pin Molex connector from the power supply for the motor.
This unit replaces a plain 120 mm fan when the builder wants synchronised lighting and a distinctive green trim. The jump is worthwhile if the motherboard has a 5 V addressable header and the case has a 120 mm mounting point with 25 mm clearance. It is not suited for radiators or coolers that demand higher static pressure or speeds above 1600 rpm.
| Brand | Vetroo |
|---|---|
| Series | CF120 |
| Model | Macaron |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | <1600 RPM |
| Air Flow | 45-50 CFM |
| Power Connector | 3 / 4 Pin |
| Color | Green |
| LED | ARGB |
| Dimensions | 120 *25 *120 MM |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
The 5V 3-pin ARGB header plugs into the motherboard's addressable RGB header and controls the fan's lighting effects and synchronisation.
It requires a standard 120 mm fan mounting area with four screw holes and 25 mm depth clearance for the frame.
Connect the 4-pin plug to the PSU for fan power and the 3-pin plug to the motherboard's 5V ARGB header; the ARGB connector is frequently overlooked.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?