Vetroo CF120 120mm ARGB case fan 1300 RPM 48.1 CFM yellow frame
- 1 Fan
- Case Fan
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Vetroo
A 120 mm hydro-bearing case fan pushing 48.1 CFM at 1300 RPM with green ARGB lighting and hidden screws
The Vetroo CF120 is a single 120 mm case fan with a green translucent frame and addressable RGB lighting. It targets builders who want coordinated colour accents inside a standard ATX or micro-ATX chassis. The 5 V 3-pin ARGB header connects directly to a compatible motherboard for software control. No separate controller is required.
A hydrodynamic bearing is rated for up to 50000 hours of operation while keeping noise low. The fan spins at 1300 rpm with a tolerance of ten percent and delivers a maximum airflow of 48.1 CFM. Four mounting screws are concealed by a flat front surface for a clean look. Power is split between a 3-pin motherboard header for lighting and a 4-pin Molex connector from the power supply for the motor.
This unit replaces a plain 120 mm fan when the builder wants synchronised lighting and a distinctive green trim. The jump is worthwhile if the motherboard has a 5 V addressable header and the case has a 120 mm mounting point with 25 mm clearance. It is not suited for radiators or coolers that demand higher static pressure or speeds above 1600 rpm.
| Brand | Vetroo |
|---|---|
| Series | CF120 |
| Model | Macaron |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | <1600 RPM |
| Air Flow | 45-50 CFM |
| Power Connector | 3 / 4 Pin |
| Color | Green |
| LED | ARGB |
| Dimensions | 120 *25 *120 MM |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The 5V 3-pin ARGB header plugs into the motherboard's addressable RGB header and controls the fan's lighting effects and synchronisation.
It requires a standard 120 mm fan mounting area with four screw holes and 25 mm depth clearance for the frame.
Connect the 4-pin plug to the PSU for fan power and the 3-pin plug to the motherboard's 5V ARGB header; the ARGB connector is frequently overlooked.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟