Vetroo CF120 120mm ARGB case fan 1300 RPM 48.1 CFM yellow frame
- 1 Fan
- Case Fan
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
Vetroo
A 120 mm hydro-bearing case fan pushing 48.1 CFM at 1300 RPM with green ARGB lighting and hidden screws
The Vetroo CF120 is a single 120 mm case fan with a green translucent frame and addressable RGB lighting. It targets builders who want coordinated colour accents inside a standard ATX or micro-ATX chassis. The 5 V 3-pin ARGB header connects directly to a compatible motherboard for software control. No separate controller is required.
A hydrodynamic bearing is rated for up to 50000 hours of operation while keeping noise low. The fan spins at 1300 rpm with a tolerance of ten percent and delivers a maximum airflow of 48.1 CFM. Four mounting screws are concealed by a flat front surface for a clean look. Power is split between a 3-pin motherboard header for lighting and a 4-pin Molex connector from the power supply for the motor.
This unit replaces a plain 120 mm fan when the builder wants synchronised lighting and a distinctive green trim. The jump is worthwhile if the motherboard has a 5 V addressable header and the case has a 120 mm mounting point with 25 mm clearance. It is not suited for radiators or coolers that demand higher static pressure or speeds above 1600 rpm.
| Brand | Vetroo |
|---|---|
| Series | CF120 |
| Model | Macaron |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | <1600 RPM |
| Air Flow | 45-50 CFM |
| Power Connector | 3 / 4 Pin |
| Color | Green |
| LED | ARGB |
| Dimensions | 120 *25 *120 MM |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
The 5V 3-pin ARGB header plugs into the motherboard's addressable RGB header and controls the fan's lighting effects and synchronisation.
It requires a standard 120 mm fan mounting area with four screw holes and 25 mm depth clearance for the frame.
Connect the 4-pin plug to the PSU for fan power and the 3-pin plug to the motherboard's 5V ARGB header; the ARGB connector is frequently overlooked.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?