Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR3 DIMM sticks with black chips no heat spreader 240 pins

A-Tech

A-Tech 4GB (2x2GB) DDR3 1333MHz Desktop RAM

SKU CH-3ZZ7-3QYCJ

A 4GB dual-channel DDR3 kit with two 240-pin DIMMs running at 1333MHz and 1.5V for desktop upgrades

  • Capacity4GB (2 x 2GB)
  • Type240-Pin PC RAM
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • Voltage1.50V
  • ECCNo

Capacity 4GB (2 x 2GB)

Speed DDR3 1333 (PC3 10600)

  • Dual-channel kit doubles bandwidth for smoother multitasking
  • 1333 MHz DDR3 speed accelerates application loading
  • 5 V operation matches standard desktop requirements
  • 240-pin UDIMM fits mainstream motherboard slots
  • Rigorously tested modules deliver dependable system stability

Kit capacity and fit

This A-Tech kit provides four gigabytes in two matched modules for desktop systems that use DDR3 DIMM slots. The dual-channel layout lets the memory controller interleave access across both sticks. It is intended for owners of compatible AMD or Intel platforms who need a straightforward capacity increase.

Speed headroom and limits

Rated at 1333 MHz with a PC3-10600 designation, the modules run at 1.5 volts and CL9 latency. Everyday multitasking and typical office workloads fit comfortably inside this bandwidth. Heavier tasks such as large media edits or modern gaming will exhaust the available throughput and capacity.

Build and daily implications

Unbuffered non-ECC construction with major-brand chips and no heat spreader keeps the profile low for tight motherboard layouts. The 240-pin edge connector seats in standard DDR3 DIMM sockets. Rigorous testing backs the stated specifications for dependable operation.

Fordele

  • Dual-channel kit doubles bandwidth for smoother multitasking
  • 1333 MHz DDR3 speed accelerates application loading
  • 5 V operation matches standard desktop requirements
  • 240-pin UDIMM fits mainstream motherboard slots
  • Rigorously tested modules deliver dependable system stability

Specifikationer

BrandA-Tech
SeriesA-Tech DDR3 Desktop Memory RAM
Model4GB Kit (2x2GB) PC3-10600 Non-ECC DIMM
Part NumberNE-SS-0694
Capacity4GB (2 x 2GB)
Type240-Pin PC RAM
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips
Recommend UseAMD & Intel Compatible

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Will this 1.5 V kit run in a motherboard that only supports 1.5 V DDR3?

Yes, the modules are rated at 1.5 V, matching standard DDR3 desktop slots.

Does the dual-channel kit require both sticks to be installed together?

The kit is tested as a matched pair for dual-channel operation, but each 2 GB module can also run singly if only one slot is available.

Are these sticks compatible with a board limited to 1333 MHz DDR3?

They run at 1333 MHz (PC3-10600) and will operate at that speed or downclock if the board specifies a lower limit.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.