Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green rectangular DIMM with black chips and gold 240-pin edge connector

A-Tech

A-Tech 4GB DDR3 1333MHz PC3-10600 ECC RDIMM 2Rx8 for Crucial CT51272BB1339 Server Memory

SKU CH-MS9D-X7M76

A 4 GB DDR3 1333 MHz ECC registered DIMM with 2Rx8 organisation for server upgrades

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity expands server multitasking headroom
  • DDR3 1333 MHz speed matches PC3-10600 spec
  • ECC registered design protects data integrity
  • 240-pin DIMM fits standard server slots
  • 5V operation meets DDR3 standard voltage

4GB DDR3 1333MHz ECC RDIMM

This 4GB DDR3 1333MHz ECC Registered DIMM is built for servers and workstations that require error-correcting memory. It operates at PC3-10600 speed with CL9 latency and a standard 1.50V supply. The module uses a 2Rx8 organisation and major-brand chips on a 240-pin form factor. It serves as a direct replacement for the Crucial CT51272BB1339 part number.

Sustained-load behaviour with ECC registered design

The registered buffer reduces electrical load on the memory controller, helping maintain signal integrity when all slots are populated. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long compute runs. Major-brand chips are tested to meet stringent quality standards for dependable operation under continuous workloads. The CL9 timing delivers consistent latency for predictable throughput.

Thermals noise and power at 1.50V standard voltage

Running at the standard DDR3 voltage of 1.50V keeps power draw within normal limits for registered server memory. Passive cooling via system airflow is sufficient; no active fan or heatsink is required on the module itself. The component produces no audible noise during operation. Compatibility with the target platform should be verified before installation to ensure proper electrical and firmware support.

Fordele

  • 4GB capacity expands server multitasking headroom
  • DDR3 1333 MHz speed matches PC3-10600 spec
  • ECC registered design protects data integrity
  • 240-pin DIMM fits standard server slots
  • 5V operation meets DDR3 standard voltage

Specifikationer

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Spørgsmål om denne vare

How much power does a 1.5V DDR3 1333MHz ECC RDIMM draw when the server runs continuously?

This registered DDR3 module operates at the standard 1.5V supply voltage. Actual power draw depends on the server platform and workload, but registered DIMMs typically consume slightly more power than unbuffered modules due to the onboard register.

What motherboard slot and chipset support are required for this 240-pin registered ECC DDR3 module?

You need a server or workstation motherboard with DDR3 240-pin DIMM slots that explicitly support registered ECC memory. Consumer desktop boards generally do not support registered DIMMs.

Can this 2Rx8 PC3-10600 registered DIMM be mixed with older unbuffered ECC DDR3 sticks in the same system?

Registered and unbuffered ECC DIMMs cannot be mixed in the same memory channel or system. All installed modules must be registered ECC for the server to POST and operate correctly.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.