Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green 240-pin DDR3L UDIMM module with black memory chips and gold contacts

A-Tech

A-Tech 4GB DDR3L 1600 ECC UDIMM 1Rx8 1.35V Server RAM

SKU CH-NRYG-9KQRX

4GB DDR3L 1600 ECC unbuffered DIMM with single-rank x8 chips at 1.35V for servers and workstations

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 4GB

Speed DDR3L 1600 (PC3L 12800)

  • ECC protection prevents data corruption in critical workloads
  • 35V low-voltage DDR3L reduces power draw
  • 1600 MHz PC3L-12800 speed accelerates server responsiveness
  • Single-rank 1Rx8 layout eases memory-channel population
  • 240-pin UDIMM fits DDR3/DDR3L server and workstation slots

4 GB DDR3L ECC UDIMM for Servers

This 4 GB DDR3L module runs at 1600 MHz with CL11 latency and 1.35 V low voltage. It is built as an unbuffered ECC UDIMM with a single-rank 1Rx8 layout on a 240-pin form factor. The stick targets administrators who need to expand memory in servers or workstations that require ECC error correction and DDR3L signalling.

Suits ECC DDR3L platforms only

The module fits systems that explicitly support DDR3 or DDR3L ECC unbuffered DIMMs. It will not work in desktop or laptop computers that use non-ECC consumer memory, nor in servers that demand registered or load-reduced DIMMs. Buyers who need higher capacity per slot or registered signalling should look at different modules.

Single-rank 1Rx8 organisation

The 1Rx8 configuration places all chips on one rank with an x8 data width, which affects how the memory controller populates channels and reaches maximum supported capacity. Verify the platform’s rank and population rules before purchasing to ensure the module is recognised and operates at the rated 1600 MHz speed.

Fordele

  • ECC protection prevents data corruption in critical workloads
  • 35V low-voltage DDR3L reduces power draw
  • 1600 MHz PC3L-12800 speed accelerates server responsiveness
  • Single-rank 1Rx8 layout eases memory-channel population
  • 240-pin UDIMM fits DDR3/DDR3L server and workstation slots

Specifikationer

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC3L-12800E
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How do I install the 240-pin DDR3L ECC UDIMM, and what step do people get wrong?

Align the notch on the module with the key in the slot, press firmly until both retention clips click, and verify the system is a DDR3 server or workstation — desktops and laptops will not accept this ECC unbuffered DIMM.

What maintenance or replacement will the 1Rx8 DDR3L module need later?

No scheduled maintenance is required; if a memory error appears, reseat the module and run a diagnostic — persistent faults mean the stick must be replaced.

What limit appears first when the CL11 1600 MHz kit runs under sustained load?

The 1.35 V DDR3L voltage ceiling and CL11 latency bound throughput before thermal throttling becomes a factor.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.