A-Tech
A-Tech 8GB DDR3L 1600 ECC SODIMM 204-Pin 1.35V for Hynix HMT41GA7AFR8A-PB HMT41GA7BFR8A-PB HMT41GA7DFR8A-PB
An 8 GB DDR3L SODIMM with ECC error correction runs at 1600 MHz and 1.35 V for server and workstation laptops
- Capacity8GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCYes
- ECC protection guards data integrity with built-in error correction
- Low 1.35V DDR3L voltage reduces power draw and heat
- 1600 MHz DDR3 speed delivers responsive multitasking performance
- 204-pin SODIMM form factor fits compatible laptop and server slots
- Replaces Hynix HMT41GA7AFR8A-PB, HMT41GA7BFR8A-PB, HMT41GA7DFR8A-PB modules
What this module is
This A-Tech 8GB DDR3L SODIMM is an ECC unbuffered memory upgrade for laptops and mobile workstations that require error-correcting code. It replaces Hynix HMT41GA7AFR8A-PB, HMT41GA7BFR8A-PB and HMT41GA7DFR8A-PB modules. The stick runs at 1600 MHz with a CAS latency of 11. Buyers who need non-ECC memory or registered DIMMs should look elsewhere.
The spec that decides fit
The module operates at 1.35 V and carries the PC3L-12800 designation, so the system must support DDR3L low-voltage operation. A board that only accepts standard 1.5 V DDR3 will not run this memory correctly. The 204-pin SO-DIMM keying and 2Rx8 organisation must also match the slot and chipset requirements.
How it fits a build
Insert the module into a free 204-pin SO-DIMM socket and the system gains 8 GB of ECC-protected capacity without raising voltage. The unbuffered design keeps latency low for typical mobile workloads. Ensure the platform enables ECC in the BIOS; otherwise the extra parity bits remain unused.
Fordele
- ECC protection guards data integrity with built-in error correction
- Low 1.35V DDR3L voltage reduces power draw and heat
- 1600 MHz DDR3 speed delivers responsive multitasking performance
- 204-pin SODIMM form factor fits compatible laptop and server slots
- Replaces Hynix HMT41GA7AFR8A-PB, HMT41GA7BFR8A-PB, HMT41GA7DFR8A-PB modules
Specifikationer
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Spørgsmål om denne vare
What does the 1600 MHz speed mean once the module is installed in a laptop?
The module runs at 1600 MHz DDR3L, delivering a peak transfer rate of PC3L-12800 when the system's memory controller supports that frequency.
How does the DDR3L 1.35 V interface affect compatibility and performance?
DDR3L at 1.35 V is backward compatible with 1.5 V DDR3 slots; the system will negotiate the lower voltage automatically.
Will the 204-pin SO-DIMM fit my laptop's memory slot?
Yes, the 204-pin SO-DIMM form factor matches the standard DDR3 laptop slot used by the Hynix HMT41GA7A/B/DFR8A-PB modules.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



