Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

A-Tech

A-Tech 8GB DDR3L 1600 ECC SODIMM 204-Pin 1.35V for Hynix HMT41GA7AFR8A-PB HMT41GA7BFR8A-PB HMT41GA7DFR8A-PB

SKU CH-4TE8-P02YR

An 8 GB DDR3L SODIMM with ECC error correction runs at 1600 MHz and 1.35 V for server and workstation laptops

  • Capacity8GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • ECC protection guards data integrity with built-in error correction
  • Low 1.35V DDR3L voltage reduces power draw and heat
  • 1600 MHz DDR3 speed delivers responsive multitasking performance
  • 204-pin SODIMM form factor fits compatible laptop and server slots
  • Replaces Hynix HMT41GA7AFR8A-PB, HMT41GA7BFR8A-PB, HMT41GA7DFR8A-PB modules

What this module is

This A-Tech 8GB DDR3L SODIMM is an ECC unbuffered memory upgrade for laptops and mobile workstations that require error-correcting code. It replaces Hynix HMT41GA7AFR8A-PB, HMT41GA7BFR8A-PB and HMT41GA7DFR8A-PB modules. The stick runs at 1600 MHz with a CAS latency of 11. Buyers who need non-ECC memory or registered DIMMs should look elsewhere.

The spec that decides fit

The module operates at 1.35 V and carries the PC3L-12800 designation, so the system must support DDR3L low-voltage operation. A board that only accepts standard 1.5 V DDR3 will not run this memory correctly. The 204-pin SO-DIMM keying and 2Rx8 organisation must also match the slot and chipset requirements.

How it fits a build

Insert the module into a free 204-pin SO-DIMM socket and the system gains 8 GB of ECC-protected capacity without raising voltage. The unbuffered design keeps latency low for typical mobile workloads. Ensure the platform enables ECC in the BIOS; otherwise the extra parity bits remain unused.

Kohokohdat

  • ECC protection guards data integrity with built-in error correction
  • Low 1.35V DDR3L voltage reduces power draw and heat
  • 1600 MHz DDR3 speed delivers responsive multitasking performance
  • 204-pin SODIMM form factor fits compatible laptop and server slots
  • Replaces Hynix HMT41GA7AFR8A-PB, HMT41GA7BFR8A-PB, HMT41GA7DFR8A-PB modules

Tekniset tiedot

BrandA-Tech
Capacity8GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Kysymyksiä tästä tuotteesta

What does the 1600 MHz speed mean once the module is installed in a laptop?

The module runs at 1600 MHz DDR3L, delivering a peak transfer rate of PC3L-12800 when the system's memory controller supports that frequency.

How does the DDR3L 1.35 V interface affect compatibility and performance?

DDR3L at 1.35 V is backward compatible with 1.5 V DDR3 slots; the system will negotiate the lower voltage automatically.

Will the 204-pin SO-DIMM fit my laptop's memory slot?

Yes, the 204-pin SO-DIMM form factor matches the standard DDR3 laptop slot used by the Hynix HMT41GA7A/B/DFR8A-PB modules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.