Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green circuit board with black memory chips and gold edge connector

A-Tech

A-Tech 8GB DDR3L 1600MHz ECC UDIMM 2Rx8 1.35V Server RAM

SKU CH-T4X0-8ZRTF

An 8 GB DDR3L 1600 MHz ECC unbuffered DIMM with 2Rx8 organisation and 1.35 V operation for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity in server workloads
  • DDR3L 1600 MHz speed supports responsive multitasking
  • Low 1.35 V voltage reduces power draw and heat
  • 2Rx8 dual-rank layout increases memory density per slot
  • 240-pin UDIMM form factor fits standard server boards

Server ECC UDIMM for Micron replacement

This 8 GB DDR3L module runs at 1600 MHz with CL11 latency and 1.35 V operation. It carries ECC protection in an unbuffered 2Rx8 layout using Micron chipset components. The part is a compatible replacement for Micron MT18KSF1G72AZ-1G6E1ZE, MT18KSF1G72AZ-1G6E1ZF, MT18KSF1G72AZ-1G6E1ZG and MT18KSF1G72AZ-1G6P1 modules.

Fits 240-pin DDR3L slots in servers and workstations

The unbuffered design plugs directly into standard DDR3L DIMM sockets without requiring registered memory support. ECC capability helps maintain data integrity for workloads that cannot tolerate silent corruption. Low-voltage 1.35 V operation reduces power draw compared with standard DDR3 modules. Builders needing registered RDIMMs or higher-density kits must select a different product.

Sustained throughput at CL11 1600 MHz

Continuous workloads benefit from the stable JEDEC-rated timing and ECC error correction across all ranks. The 2Rx8 organisation distributes accesses across two ranks for consistent bandwidth under load. Modules are tested to meet quality standards before shipment. Systems limited to lower DDR3 speeds will clock the module down automatically.

Fordele

  • ECC protection guards data integrity in server workloads
  • DDR3L 1600 MHz speed supports responsive multitasking
  • Low 1.35 V voltage reduces power draw and heat
  • 2Rx8 dual-rank layout increases memory density per slot
  • 240-pin UDIMM form factor fits standard server boards

Specifikationer

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18KSF1G72AZ-1G6E1ZE, MT18KSF1G72AZ-1G6E1ZF, MT18KSF1G72AZ-1G6E1ZG, MT18KSF1G72AZ-1G6P1
Capacity8GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMicron Chipset
FeaturesMT18KSF1G72AZ-1G6E1ZE, MT18KSF1G72AZ-1G6E1ZF, MT18KSF1G72AZ-1G6E1ZG, MT18KSF1G72AZ-1G6P1

Spørgsmål om denne vare

How many 240-pin DDR3L slots must the server motherboard provide for this 8 GB ECC UDIMM to install?

The module uses a standard 240-pin DDR3 DIMM form factor, so the motherboard needs at least one free DDR3L UDIMM slot that accepts 1.35 V unbuffered ECC memory.

What is the typical power draw per module at the rated 1.35 V when the server runs continuously?

At 1.35 V the DDR3L module consumes less power than standard 1.5 V DDR3, reducing heat output during sustained workloads in server or workstation environments.

Which existing Micron part numbers does this A-Tech module directly replace?

It is a compatible replacement for Micron MT18KSF1G72AZ-1G6E1ZE, MT18KSF1G72AZ-1G6E1ZF, MT18KSF1G72AZ-1G6E1ZG and MT18KSF1G72AZ-1G6P1.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.