Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green rectangular circuit board with gold connectors and black memory chips

A-Tech

A-Tech 8GB DDR4 3200MHz Desktop RAM

SKU CH-4WN1-JSX23

An 8 GB DDR4 3200 MHz desktop DIMM running at 1.2 V with 288 pins, tested for Micron replacement compatibility

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • Tested Frequency3200
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • Boosts system responsiveness with 3200MHz DDR4 speed
  • Expands multitasking headroom using 8GB capacity
  • Fits standard desktop boards via 288-pin DIMM form factor
  • Runs efficiently at 1.2V DDR4 standard voltage
  • Directly replaces Micron MTA8ATF1G64AZ modules for easy upgrades

What this module is

This is an A-Tech 8GB DDR4 3200MHz desktop DIMM built to PC4-25600 speed at 1.20V. It is an unbuffered, non-ECC stick for standard desktop boards that take 288-pin memory.

Why upgrade to this stick

It replaces Micron MTA8ATF1G64AZ-3G2, MTA8ATF1G64AZ-3G2E1, MTA8ATF1G64AZ-3G2J1 and MTA8ATF1G64AZ-3G2R1 modules when the original fails or when a system needs more capacity. The jump is worth it if the board supports 3200MHz operation and the current memory is slower or missing.

How it fits a build

The module plugs into any desktop DDR4 slot wired for 288-pin unbuffered DIMMs and runs at the standard 1.2V without extra configuration. It adds 8GB of capacity so the system can keep more data in fast memory instead of paging to disk. Builders who need ECC, registered buffering or speeds beyond 3200MHz should look elsewhere.

Fordele

  • Boosts system responsiveness with 3200MHz DDR4 speed
  • Expands multitasking headroom using 8GB capacity
  • Fits standard desktop boards via 288-pin DIMM form factor
  • Runs efficiently at 1.2V DDR4 standard voltage
  • Directly replaces Micron MTA8ATF1G64AZ modules for easy upgrades

Specifikationer

BrandA-Tech
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
Tested Frequency3200
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Spørgsmål om denne vare

Will the 288-pin DDR4 DIMM fit my desktop motherboard?

The module uses the standard 288-pin DDR4 DIMM form factor, so it fits any desktop board with a DDR4 slot.

How do I install the 1.20V DDR4 3200MHz stick correctly?

Align the notch with the slot key, press down evenly until both side clips click, then verify 3200 MHz in BIOS.

When should I replace this 8GB DDR4 module?

Replace it if memory diagnostics report errors, if the system becomes unstable, or when you need more than 8GB capacity.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.