EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
An 8 GB DDR4 3200 MHz desktop DIMM running at 1.2 V with 288 pins, tested for Micron replacement compatibility
This is an A-Tech 8GB DDR4 3200MHz desktop DIMM built to PC4-25600 speed at 1.20V. It is an unbuffered, non-ECC stick for standard desktop boards that take 288-pin memory.
It replaces Micron MTA8ATF1G64AZ-3G2, MTA8ATF1G64AZ-3G2E1, MTA8ATF1G64AZ-3G2J1 and MTA8ATF1G64AZ-3G2R1 modules when the original fails or when a system needs more capacity. The jump is worth it if the board supports 3200MHz operation and the current memory is slower or missing.
The module plugs into any desktop DDR4 slot wired for 288-pin unbuffered DIMMs and runs at the standard 1.2V without extra configuration. It adds 8GB of capacity so the system can keep more data in fast memory instead of paging to disk. Builders who need ECC, registered buffering or speeds beyond 3200MHz should look elsewhere.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The module uses the standard 288-pin DDR4 DIMM form factor, so it fits any desktop board with a DDR4 slot.
Align the notch with the slot key, press down evenly until both side clips click, then verify 3200 MHz in BIOS.
Replace it if memory diagnostics report errors, if the system becomes unstable, or when you need more than 8GB capacity.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?