Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
A green printed circuit board with black memory chips, 288 gold contacts along the bottom edge, no heat spreader

A-Tech

A-Tech 8GB DDR5 5200MHz CL42 1.1V UDIMM 288-Pin Desktop RAM

SKU CH-ZTKA-WQZJF

8GB DDR5 desktop module running at 5200MHz with CL42 latency and 1.1V operation

  • Capacity8GB
  • SpeedDDR5 5200 (PC5 41600)
  • Tested Frequency5200
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCNo

Capacity 8GB

Speed DDR5 5200 (PC5 41600)

CAS Latency CL42

Color Green/Black

  • Green
  • Green/Black

De overstregede versioner findes, men er ikke på lager her.

  • 8 GB capacity adds headroom for multitasking
  • DDR5 5200 speed moves data at PC5-41600 bandwidth
  • CL42 latency keeps timing tight at 1.1 V
  • 288-pin UDIMM fits standard desktop DDR5 slots
  • Unbuffered non-ECC design suits mainstream desktop builds

DDR5 5200 UDIMM for Desktop Upgrades

This A-Tech module is an 8 GB DDR5 DIMM rated at 5200 MT/s with CL42 latency and 1.10 V operation. It uses a standard 288-pin unbuffered non-ECC design built with major-brand DRAM ICs. The stick has no heat spreader and carries a green-black PCB.

Suits DDR5 Systems Needing Basic Capacity

Builders adding memory to a desktop that accepts DDR5-5200 UDIMMs will find this module a straightforward fit. Systems that require ECC, registered DIMMs, higher speeds, lower latencies, or larger single-module capacities should consider other options.

Single Module at 8 GB Decides Fit

The 8 GB capacity per DIMM determines whether this upgrade meets the target system's memory requirements and slot count. Verify the motherboard's maximum per-slot limit and total supported memory before purchase.

Fordele

  • 8 GB capacity adds headroom for multitasking
  • DDR5 5200 speed moves data at PC5-41600 bandwidth
  • CL42 latency keeps timing tight at 1.1 V
  • 288-pin UDIMM fits standard desktop DDR5 slots
  • Unbuffered non-ECC design suits mainstream desktop builds

Specifikationer

BrandA-Tech
SeriesA-Tech DDR5 Desktop Memory RAM
ModelA-Tech 8GB DDR5-5200 Desktop RAM Module
Capacity8GB
SpeedDDR5 5200 (PC5 41600)
Tested Frequency5200
CAS LatencyCL42
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand DRAM IC Chips
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseAMD & Intel Compatible

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Will this 8 GB DDR5 module fit my motherboard's 288-pin DIMM slots?

Yes, the module uses the standard 288-pin UDIMM form factor for desktop DDR5 memory.

Does the 1.1 V operating voltage match the DDR5 standard for my platform?

The module runs at 1.1 V, which is the defined DDR5 standard voltage.

Is this single 8 GB stick compatible with both AMD and Intel desktop systems that support DDR5-5200?

The product is listed as compatible with AMD and Intel platforms that accept DDR5-5200 UDIMM memory.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.