Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
A green printed circuit board with black memory chips, 288 gold contacts along the bottom edge, no heat spreader

A-Tech

A-Tech 8GB DDR5 5200MHz CL42 1.1V UDIMM 288-Pin Desktop RAM

SKU CH-ZTKA-WQZJF

8GB DDR5 desktop module running at 5200MHz with CL42 latency and 1.1V operation

  • Capacity8GB
  • SpeedDDR5 5200 (PC5 41600)
  • Tested Frequency5200
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCNo

Capacity 8GB

Speed DDR5 5200 (PC5 41600)

CAS Latency CL42

Color Green/Black

  • Green
  • Green/Black

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • 8 GB capacity adds headroom for multitasking
  • DDR5 5200 speed moves data at PC5-41600 bandwidth
  • CL42 latency keeps timing tight at 1.1 V
  • 288-pin UDIMM fits standard desktop DDR5 slots
  • Unbuffered non-ECC design suits mainstream desktop builds

DDR5 5200 UDIMM for Desktop Upgrades

This A-Tech module is an 8 GB DDR5 DIMM rated at 5200 MT/s with CL42 latency and 1.10 V operation. It uses a standard 288-pin unbuffered non-ECC design built with major-brand DRAM ICs. The stick has no heat spreader and carries a green-black PCB.

Suits DDR5 Systems Needing Basic Capacity

Builders adding memory to a desktop that accepts DDR5-5200 UDIMMs will find this module a straightforward fit. Systems that require ECC, registered DIMMs, higher speeds, lower latencies, or larger single-module capacities should consider other options.

Single Module at 8 GB Decides Fit

The 8 GB capacity per DIMM determines whether this upgrade meets the target system's memory requirements and slot count. Verify the motherboard's maximum per-slot limit and total supported memory before purchase.

Pluspunten

  • 8 GB capacity adds headroom for multitasking
  • DDR5 5200 speed moves data at PC5-41600 bandwidth
  • CL42 latency keeps timing tight at 1.1 V
  • 288-pin UDIMM fits standard desktop DDR5 slots
  • Unbuffered non-ECC design suits mainstream desktop builds

Specificaties

BrandA-Tech
SeriesA-Tech DDR5 Desktop Memory RAM
ModelA-Tech 8GB DDR5-5200 Desktop RAM Module
Capacity8GB
SpeedDDR5 5200 (PC5 41600)
Tested Frequency5200
CAS LatencyCL42
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand DRAM IC Chips
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseAMD & Intel Compatible

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will this 8 GB DDR5 module fit my motherboard's 288-pin DIMM slots?

Yes, the module uses the standard 288-pin UDIMM form factor for desktop DDR5 memory.

Does the 1.1 V operating voltage match the DDR5 standard for my platform?

The module runs at 1.1 V, which is the defined DDR5 standard voltage.

Is this single 8 GB stick compatible with both AMD and Intel desktop systems that support DDR5-5200?

The product is listed as compatible with AMD and Intel platforms that accept DDR5-5200 UDIMM memory.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.