Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

A-Tech

A-Tech 8GB DDR5 4800MHz CL40 288-Pin 1.1V Desktop RAM

SKU CH-6DDT-ZJJCT

An 8 GB DDR5 4800 MHz desktop DIMM with CL40 latency and 1.1 V operation for faster multitasking

  • Capacity8GB
  • SpeedDDR5 4800 (PC5 38400)
  • Tested Frequency4800
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo

Speed DDR5 4800 (PC5 38400)

CAS Latency CL40

Color Green

  • Green
  • Green/Black

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • 8GB capacity lets you run more programs at once
  • DDR5 4800MHz speed moves data faster than DDR4
  • CL40 latency at 1.1V balances response time and efficiency
  • 288-pin UDIMM fits standard desktop DDR5 slots
  • Non-ECC unbuffered design keeps cost low for everyday workloads

8GB DDR5 4800MHz Desktop Module

This 8GB DDR5 DIMM runs at 4800MHz with a CL40 latency and operates at the standard 1.1V. The unbuffered, non-ECC design uses a 288-pin layout and carries major-brand DRAM chips. It is built for desktop systems that support DDR5 memory.

Upgrade from DDR4 1.2V platforms

Moving from DDR4 at 1.2V to this DDR5 module drops the operating voltage to 1.1V and doubles the channel architecture per DIMM. The jump is worth it when your motherboard and CPU support DDR5 and you need the extra bandwidth for heavier multitasking or faster data throughput.

Suits DDR5 desktop builders and upgraders

This single 8GB stick fits users adding capacity to a DDR5-compatible board or starting a new build with one module. Buyers whose systems only accept DDR4, or who need ECC or registered memory, should look at a different product.

Pluspunten

  • 8GB capacity lets you run more programs at once
  • DDR5 4800MHz speed moves data faster than DDR4
  • CL40 latency at 1.1V balances response time and efficiency
  • 288-pin UDIMM fits standard desktop DDR5 slots
  • Non-ECC unbuffered design keeps cost low for everyday workloads

Specificaties

BrandA-Tech
SeriesA-Tech DDR5 Desktop Memory RAM
Capacity8GB
SpeedDDR5 4800 (PC5 38400)
Tested Frequency4800
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
ColorGreen
Heat SpreaderNo
Recommend UseAMD & Intel Compatible

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the 288-pin DDR5 module fit my motherboard's DIMM slots?

The stick uses the standard 288-pin DDR5 DIMM form factor, so it fits any desktop board with DDR5 slots; DDR4 slots are keyed differently and will not accept it.

What is the correct way to seat the module, and what step do builders often miss?

Align the notch with the slot key, press straight down until both side clips click, and verify the clips are fully locked — skipping the click check is the common mistake.

Does the lack of a heat spreader mean I need to add cooling later?

No extra cooling is required; the module runs at the standard 1.1 V DDR5 voltage without a spreader and is rated for continuous operation as shipped.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.